Braided fishing lines (or, as they are also called, cords) in many respects are significantly superior to monofilament counterparts. Moreover, their price is much higher. A wide variety of braided lines can be found in modern fishing markets. What is the best spinning braid?

Many anglers believe that good result in fishing, a braided line with a minimum diameter will help to achieve. Moreover, this does not depend on the type of fishing. Those who prefer to use thin gear put forward such arguments: using a thin model minimizes the effects of currents and winds, and also provides high sensitivity and casts to the most distant areas.

This works, but in the event that fishing takes place where the likelihood of a hook is completely excluded. You can fish, but there is a high probability of losing the bait, catch and the braid itself. To play it safe from this, it is necessary to choose a braided line taking into account its breaking load relative to any type of fishing.

Braided line for spinning: important parameters

This is one of the main characteristics to consider when purchasing. The angler should choose the power in accordance with the type, object and conditions of the future fishing. The class of the selected tackle and the characteristics of the lures are taken into account. It is advisable to select a wicker model for spinning, looking not at the diameter in millimeters, but at the degree of its breaking load, which is indicated on the package.

On many variants made in Japan recently, the diameter is not indicated at all, and only Japanese sizes are present. The value of the most popular of them is from 0.2 to 1.5. The latest generation Japanese models have a comparatively accurate diameter value. And in other lines of the same kind, their real diameter is often indicated with an increase of several tenths or hundredths of a millimeter. If you set a goal, then it is quite possible to find two models that have the same diameter value and breaking load, which will be significantly different.

In addition, you should definitely take into account that the value of the breaking load on the node will necessarily be less than the value written on the package. The values of the declared and actual given load very often do not coincide with each other. Differences in diameter are more significant than these differences. For this reason, when purchasing such a line, you should start from the breaking load in pounds (lb). 1 lb is 2.2 kg.

"Braids" with a load of 4-6 lb (1.8-2.7 kg) are suitable for catching small fish from the shore (weighing up to 300-400 g). Lines belonging to this class are perfectly combined with light and ultra-light tackle. They can be used for fishing, as well as other small predatory fish for microjig baits, small wobblers and small spinners. The 4-6 lb versions are suitable for boat fishing for perch only. With a load of 8.1 Olb (3.5-4.5 kg), they are used for fishing from the bank of asp, chub, small pike, ide in small bodies of water. Such braids are useful for catching small pike, perch and pike perch for a light coastal jig. They are also used when fishing with a castmaster for such fish as perch and asp.

Braided line for spinning with a strength of 12-15 lb (5.4-6.8 kg) is used in the process of fishing from a boat for pike, zander and large perch on jig lures related to the heavy and medium range, and for wobblers, reaching a length of no more than 110 mm.

Braids with a strength value equal to 18-20 lb (8-9 kg) are used for fishing in conditions of increased difficulty (for example, if there is a large amount of algae, snags or stones at the bottom in the selected area) from a boat to a perch, pike perch or pike using jig lures belonging to the heavy and medium range, as well as in the process of fishing with large wobblers reaching a length of more than 100 mm.

Pike spinning braid with dough over 20 lb (over 9 kg) is used when fishing for jerkbaits and when fishing by means of trolling.

Unwinding

This is a relatively simple parameter. The most popular value is 150 m. The minimum permissible unwinding value for fishing with a spinning rod is 100 m (it is used in cases when the braid is rarely used and its losses during the season are minimal). There are also options for 125 m, 135 m, 200 m, 250 m, used for spinning fishing.

Cord type

There are three main groups of braided lines, which differ in the type of fiber connection:

braided - the most common, mostly soft and relatively stretchable cords, characterized by a good ratio of quality and cost indicators;
soldered through the use of heat treatment - rigid and inextensible fishing lines with a more rounded section;
sheath-type braids - have an almost circular cross-sectional shape (in such cords, the fibers are in a sheath made of a material of increased strength).

Weaving density

This parameter affects many characteristics of the braid: its true diameter, wear resistance and calibration along the entire length. Even the cheapest braided cord will have several times the strength of any mono line. The more tightly the fibers of the cord are intertwined, the higher its characteristics will be. Loose weaving of the cord when choosing is easy to notice: fibers of similar braided line delaminate if you try to squeeze or twist it. These braids are characterized by a predominantly flat cross-section and sail very much under the influence of wind and water. In addition, loose braided lines are highly susceptible to damage.

Stability of paint

This parameter is not paramount, but it also deserves attention. In some cases, when winding the line around the spool, anglers will observe noticeable paint residues on their hands after the winding is complete. This indicates the unsatisfactory quality of the braid. In addition, fishing line of this quality may discolor altogether after several uses (this applies mainly to the first 10 meters, which are subjected to the greatest load when playing fish).

Wear resistance

This parameter indicates the degree to which the braided line retains its existing characteristics during its use. Each such cord begins to wear out over time, loses its strength and piles. The most durable cords are of the classic type, made of quality material, having a smooth and slippery surface and woven in the most dense way. Loose classic and rigid soldered cords with regular use wear out much faster and rarely last more than one season.

Braided line for spinning: an overview of popular

Sensitive, high-strength braided line. It is well suited for medium-heavy spinning rods. Unwinding of 150 m will allow it to be used for a long period. Woven tightly enough. It has a circular cross-section and a slippery surface. You can use this option when fishing for such fish as pike perch and pike, with jig lures weighing 10-50 g, as well as for twitching with large wobblers. The stretch of this cord is minimal. The breaking strength, although it can be less than 6.8 kg declared, but at the same time it is well suited for the bulk of cases. The diameter of this braid allows it to actively work with baits weighing more than 10 g. The material from which the cord is made does not absorb water, that is, it fully retains its qualities when working under water. Available in white and acid green colors.

Elastic, highly sensitive braided line with high density and round diameter. It is characterized by ease of unwinding, high wear resistance and excellent strength.

This braid is generally not labeled with a tensile strength in pounds, but is marked with a 0.15 mm diameter and a tensile strength of 9 kg. This figure does not correspond to the indicated 10 lb at all, the true breaking strength of this model is approximately 15-16 lb. The actual value of the diameter of this cord is not less than 0.23 mm. An excellent choice for medium-heavy spinning rods. Can cope well with shells and an abundance of snags. Suitable for jig fishing in conditions of an excessively littered bottom and an abundance of underwater vegetation. The unwinding is 135 m. In most cases, such a model can withstand a couple of seasons.

A great option for serious fishing on predatory fish... This model is quite durable, has high wear resistance, but less dense weave than the previous ones. Almost shaggy with active use. The actual diameter of such a braid is 0.25 mm, which differs from the declared 0.12 mm. The unwinding is 100 m. It is used for feeder fishing, as well as for trolling and jig fishing in "strong" places. Provides the ability to unbend in the case of "dead" hooks, which in turn saves the bait. Effectively "rescues" wobblers from hooks, which are distinguished by high cost.

P-line Specrex 0.23 mm, 15 lb

It significantly differs from the options discussed above with an increased level of sensitivity. It is also distinguished by the convenience of unwinding (136 m), high strength indicators and an adequate price. Its wear resistance is not very high, but this drawback is inherent in all cords made by using heat treatment. When used, the working part of this braid begins to shaggy over time. This does not affect the strength, but it makes it a little difficult to use it when fishing with lures that have a relatively low weight. If you use lures weighing more than 10 g, fishing will take place without such inconvenience. The available breaking strength of this model is quite consistent with the declared one, and the diameter is slightly less than that indicated. Well suited for fishing on a relatively uncluttered bottom, with lures weighing more than 10g.

This braided spinning line was able to show itself with dignity in the process of twitching fishing with deep wobblers. The unwinding of such a cord is 150 m. The specified characteristics are quite consistent, when used, it does not shaggy, it has a good outreach. This braided line differs in the following: for its manufacture, a hybrid eight-core material is used, consisting of 4 polyester fibers and 4 polyethylene fibers. Due to this feature, such a cord is resistant to wear and tear and has a sinking property, helping to deepen deep wobblers.

Varivas Super Trout Advance Max Pe 0.148mm, 11lb

This spinning rod belongs to the category of Japanese-made models, which are distinguished by an impressive cost. It has a round cross-section and a slippery surface, has the most durable weaving. Such a fishing line is mainly used when fishing with a wobbler for chub in small bodies of water. In addition, such a cord can also be used for light fishing for pike from the shore and in the process of wading for asp with castmasters. This model has a tensile strength of approximately 8 lb and is exactly as specified.

One of the thinnest braided lines for spinning. The unwinding is 120 m. It can be used in combination with lures weighing from 1 to 9 g and ultra-light tackle. Differs in super dense weaving and high abrasion resistance. Due to the slippery surface of the cord, it provides maximum reach. This spinning braid is suitable for fishing sea fish small in size, living on a rocky bottom and belonging to the rockfish family. It wears out rather slowly, but the small diameter of the cord allows frequent breaks when caught.

Varivas Lite Game Mebaru 0,4 mm, 8 lb

A worthy Japanese-made model, also designed for rockfish offshore prey. Has a tight weave and a slippery surface. It is used for microjig fishing for fish such as perch. The actual breaking load is approximately 3 kg, which makes it possible to use this braid not only when fishing for perch, but also when fishing for larger fish.

Beware of counterfeits

How to choose a cord for spinning and not buy a fake? Most often, such popular brands as Power Pro and Fire Line are counterfeited, the invariable leaders in the number of counterfeits of which have remained for quite a long time braided cords American-made Power Pro. How to distinguish a fake product from a high quality product? Power Pro originals differ exclusively in odd diameters and are sold in plastic packaging, which must contain a barcode. The package must include an insert showing the appropriate parts for your particular model. The line itself must be wound on a special reel, which allows for high-quality winding of the line on the spool.

Benefits of fluorocarbon line for winter fishing ⇩
Why is fluorocarbon line better than regular line? ⇩
Top 7 best fluorocarbon fishing lines with prices ⇩
Sufix ⇩
Tiagra ⇩
Ion power ⇩
Owner ⇩
Megastrong ⇩
ADES Daiwa ⇩
SHIMANO ANTARES FLUOROCARBON ⇩
Which fluorocarbon line to buy? ⇩
Fluorocarbon line diameter value ⇩
Each type of fishing has its own line ⇩
User reviews of fluorocarbon line for winter fishing ⇩
Tips from experienced fishermen ⇩

Fishing is a favorite pastime for many men. Firstly, fishing is a great pastime, an opportunity to be on fresh air, nature and catch more fish. Secondly, it causes genuine excitement and a desire to get ahead of, say, a friend in fishing, because men are driven by the spirit of competition.

These two components can make fishing successful only if all the necessary equipment is prepared for this event. The main tackle is a fishing rod, and its main element is a fishing line.

It is on her that the whole load falls when the fisherman drags the fish, so there is different types woods. It is worth noting that of all the variety, it is the fluorocarbon thread that is gaining momentum. Read more about fluroleque below.

Fluorocarbon is a polymer created by combining fluorine and carbon. This material has high performance and does not lend itself to combustion.

It is characterized by increased wear resistance and almost imperceptible "stay" in water. This is due to the low refractive index of light in fluorocarbon fishing line, which practically coincides with the refractive index of light in water.

The main characteristics of such material:

Fluronite is resistant to various temperature fluctuations. Even in cold winters, its application is possible.
The polymer does not degrade when exposed to water, that is, it does not change its performance properties.
The fluorocarbon line is practically invisible in the water. Of course, it does not have one hundred percent transparency, but it is close to the ideal of all lines. Considering that any fisherman strives to create conditions for fishing close to real, in terms of feeding the bait, this quality of fluonite is priceless.
Possesses increased "sensitivity" to fish, and this sensitivity, in turn, is transmitted to the fisherman through the fishing line. This is ensured by the rigidity of the fluorocarbon tackle.
Due to the relatively high stiffness index, such a fishing thread is very strong, it is not afraid of stones, driftwood, if it suddenly catches on them.
The fluorocarbon polymer has good mass, which makes it possible for the line to sink to the bottom of the reservoir without hindrance and quickly.

Benefits of Fluorocarbon Fishing Line for Ice Fishing

As noted above, fluorocarbon thread is relevant not only in summer, but also in winter. It perfectly tolerates low temperatures, even extreme ones, dropping to 30 degrees below zero.

Another indisputable advantage of a fluorocarbon thread for winter fishing is that it is resistant to abrasion. In winter, constant contact of the gear with ice is inevitable, which can harm the thread, but not fluorocarbon.

Why is fluorocarbon line better than regular line?

In order to determine what is still better for tackle made of fluorocarbon in comparison with the usual one, it is necessary to compare their quality characteristics.

Here is an analysis of the main indicators:

First of all, strength is the most important indicator of any tackle. So the fluorocarbon thread in water is very strong, it has a low breaking load factor. The usual tackle is inferior in this indicator, it becomes thicker in the water, and, therefore, more fragile.
"Camouflage" of the line is an equally important indicator. At first glance, all lines are not very different from each other, but in the aquatic environment everything changes. The fluorocarbon version gains transparency due to the correct refraction of light.
The quantity and quality of the bite. A fisherman using a fishing rod with a fluorocarbon line has a higher bite performance than a fisherman using a regular line. In addition, the number of retirements in the first case is reduced to a minimum.

The use of pure fluronite is not always justified. This is due to some of its shortcomings:

Fluronite is strong if immersed in water. Such fishing threads are adapted for heavy loads, including breaking ones.
Quite a high price. This is practically the most expensive option of all types of lines that are available. The high cost is justified by a number of indisputable advantages of fluorocarbon.

Top 7 best fluorocarbon fishing lines with prices

Fluorocarbon gears differ in breaking load and diameter. These parameters affect the formation of prices, and the manufacturer of fluoronite is also very important. Here are the top 7 fluorocarbon products:

Sufix

Japan. The line from this manufacturer is similar to nylon threads. A very high quality polymer product that has all the qualities it needs. A coil (100-150 meters) of such a thread costs about 140 rubles, there are also more expensive samples up to 900 rubles.

Tiagra

Japan. Fluorocarbon tackle from this manufacturer is very reliable, high quality. The price ranges from 160 rubles and more.

Ion power

Japan. Sporty version of fluronite. Almost invisible in water, resistant to aggressive external environment. It costs about 250 rubles.

Owner

Production: USA. Highly popular view time-tested fluoros. The price is about 300 rubles, depending on the forest intensity and higher.

Megastrong

Chinese manufacturer. Not a bad tackle and, if used correctly, it will serve for a long time. The prices are different, depending on the class to which the fluorocarbon belongs: extra class - the price is about 400 rubles, economy class - lower in cost.

ADES Daiwa

Japan. The price starts from 150 rubles. Has a high transparency index, increased wear resistance, tensile memory is practically absent.

SHIMANO ANTARES FLUOROCARBON

With this fluorocarbon tackle, the bite will go off with a bang. It has all the qualities that real carbon should have. The price is about 400 rubles and more.

All prices are for fluorine equipment, which are not fakes and are made from 100% fluorine and carbon.

Which fluorocarbon line to buy?

Anyone often wonders what to buy and what not. This also applies to fluorocarbon gear. To make the right choice, you need to focus on your fishing needs. In this regard, one or another option is selected. It is worth paying attention to the elongation of the gear and its transparency index. The quality of fishing will depend on this.

Fluorocarbon line diameter value

The diameter of the line worries every fisherman. Most agree that the thinner the water thread, the better. It is believed to be less visible in water. Tackle of this diameter is good, but not for all rods. It is especially suitable for "sensitive" rods or spinning rods. Thicker tackle options are ideal for non-inertia reels where the line is wound with a certain amount of effort.

Each type of fishing has its own line

Different fishing rod equipment is used to catch different fish. First of all, this concerns the fishing line. Depending on the diameter, one or another type of fluonite is selected:

A diameter of 0.10 mm fishing thread is ideal for fishing such fish as perch, ruff, roach. These are all fish that do not weigh much, so a tackle of such thickness will cope well.
Diameter 0.12 mm is suitable for trolling, not too heavy, as well as jig.
The thickness of 0.14-0.16 mm of fluronite ensures catching of larger fish, also restrains strong jerks of fish, preventing the erosion of the fluronite.
The 0.18mm thread thickness is ideal for deep water fishing, especially in winter.

User reviews of fluorocarbon line for winter fishing

How to attach a hook to a fluorocarbon line?

You can use one universal knot to securely tie the hook to the fluoroscale.

The tying scheme is as follows:

Thread the thread through the eye of the hook and pull it about 10 cm.
Make a loop from the resulting segment.
With the left part of the thread, wrap the forend of the hook.
Thread the end of the line into the loop formed earlier.
Moisten the winding area with water, then pull on both ends of the thread to tighten a strong knot.

Tip # 1. In order for the fishing line to retain its original qualities for a long time, a piece of fishing line is cut from the coil to the required length, wiped with a glycerin solution. Next, the cut off line is wound on a piece of cardboard and stored in a paper bag in a dark, cool place.

Council number 2. To prevent unnecessary creases and kinks from forming on the fishing line, the reel is rubberized by putting on any trims of rubber pipes.

Council number 3. To remove rust from the hooks, stick them into a bar of soap. After a while, the rust will come off.

Thus, fluorocarbon fishing thread has a number of undeniable advantages. Thanks to them, it is a real boon for any angler.

This fishing material provides successful fishing, if only because such a line is practically invisible in the water. It easily and quickly immerses in water, and also almost does not deform at all during use. The purchase of a flurollesque is justified in a large catch and, as a result, in a good mood.

Fluorocarbon line for winter fishing - characteristics, advantages and disadvantages. Link to main post

Editorial staff
about the project

Catching bream on a feeder from the shore

Bream is a pretty smart fish. Mature representatives of this species keep mainly at depth. Therefore, catching this fish from the shore is not an easy task. There is no way to do without feeder rod... It is a versatile tool for deep fishing. The feeder can catch not only bream, but also more big fish: carp, catfish, crucian carp. In this article, we will deal with a rig designed for catching bream from the shore. Consider which rod to choose, which one to equip with a reel, as well as which line to use. We will also tell you what kind of bait to buy and use a stand.

Feeder rod

The choice of a rod depends on the characteristics of the reservoir where the fishing will take place. For a river that is small in width, a feeder up to three meters long is enough. If our reservoir is wide enough and long casts are planned, the rod should be chosen from three meters and higher. The further the cast, the longer the rod. We should also pay special attention to the test of the used feeder. The test is the mass of the cast weight that the rod is designed for. As a rule, the stronger the current, the more weight feeders. For strong current the weight of the feeder can reach one hundred grams, with a weak one about eighty. After choosing the rod, we proceed to the choice of the used reel.

Reel for catching bream on the current ↓
Bream fishing line ↓
Feeder equipment for catching bream in the current ↓
Gardner loop feeder accessories ↓
Asymmetrical loop feeder accessories ↓
Bait for bream ↓
Rod stand ↓
Let's start making: ↓

Reel for catching bream on the current

Since fishing for bream with English tackle involves the use of heavy reels, it should be chosen from the traction options. For our purposes, we need a coil with a low gear ratio. It should be in the range from 1: 5 to 1: 6. With a higher gear ratio, the coil will quickly fail. The size is suitable for 3000. Do not forget to adjust the friction brake so that when large fish jerk violently, you will not be left without a rig.

Bream fishing line

Braided fishing line

For fishing bream in places where there is a current, the "braided" line has proven itself well. With the same diameter as mono, the "braid" is much stronger. Also, the "braided" line has zero elongation, which will have a positive effect on the sensitivity of our tackle and will allow us to determine the beginning of the bite of even the most "sluggish" fish. The diameter of the line should be taken as 0.12 millimeters. This is the optimum thickness.

Feeder equipment for catching bream on the current

After we have selected the rod, reel and line, we need to tie the fishing tackle. Since the place of fishing is meant with the presence of a current, in these cases, two types of equipment have proven themselves best, the "Gardner loop" and "asymmetric loop". Let's take a closer look at how to make them.

Gardner's loop feeder accessories

There are two options for making this type of tackle. The first is on the main line, the second is on a separate piece and subsequent installation to the base. There is no consensus on how better. As a rule, beginner anglers knit on a separate piece to train the knitting technique. The more experienced knit immediately on the basis. So, let's start knitting tackle:

At the end of the main line we make a small loop (for a leash).
We retreat the distance from the finished loop to the length of the palm.
At the measured place we knit a large loop in such a way that the feeder passes through it.
We put the feeder on the swivel and attach it to the large loop.
We attach a leash with a hook to a small loop. Leash length from thirty centimeters.

Asymmetrical loop feeder accessories

According to experienced anglers, this is the most sensitive rig, transmitting even the weakest and most careful bite. To make it you need:

Cut off a one meter long piece of fishing line.
We fold our piece in half.
We tighten one end so that in the end it is ten centimeters longer than the other.
We tie the ends. The longer one will be used to attach to the main line. We make a loop on it and put a swivel.
We put the feeder on the swivel in the loop. The feeder should slide freely on the loop.
We pull the loop over the feeder on one side and the knot on the other.
On one side of the loop, we retreat from the trough a distance equal to one third of the loop length and knit a twist for a diverting leash.
The twist should be ten centimeters long, at the end of knitting we fix it with a double knot, leaving a loop for attaching the leash.

The end result is a loop, with halves different lengths... A sliding feeder is fixed on the long half. Now that the gear is ready, it's time to talk about bait.

Autumn fishing for bream on a feeder. Equipment, bait, bait.

How to catch bream from the shore or boat? Let's find out in this article.

We make the best bait for bream from a variety of products.

How to increase your fish catch?

For 7 years of active fishing enthusiasm, I have found dozens of ways to improve the bite. Here are the most effective ones:

Bite activator. This addition of their dry blood attracts fish the most in cold and warm water. Discussion of the "Hungry Fish" bite activator.
Increasing the sensitivity of the tackle. Read the appropriate manuals for your specific tackle type.
Pheromone-based baits.

Bait for bream

Of the commercially available bait mixtures, the most common are:

FISH DREAM "Bream". This classic groundbait has a spicy sweet smell, moderately viscous, and has a brown color. The composition contains crushed flax seed. The grinding is even. Also FISH DREAM produces other baits, "Bream pea", protein-rich bait "Bream + Betaine" and "Bream for cold water".

Flagman PROFESSIONAL "Bream". This bait picks up large fish well. Medium grinding with a content of coarse particles. The smell of the mixture is delicate.

Sensas 3000 Super Black "Bream". This manufacturer produces several types of bait mixture for bream, adapted to different fishing conditions.

Rod stand

For feeder fishing bream needs a rod stand. Some simply use a slingshot, sticking it into the ground and laying a feeder on it, resting the other end in the soil. You can also buy a stand in a store. We will now tell you how to make your own feeder stand from a plastic hanger. For this we need:

A suitable plastic clothes hanger with a removable hook and a hole diameter just over six millimeters.
Rubber tube suitable for the thickness of the hanger.
A construction hairpin 6 millimeters with a thread, or, for example, a tube from an old cornice, with the same diameter.
6mm wing nut and nut.
Sharp knife or hacksaw.

Let's start making:

So, we tried to tell you how to catch bream with a feeder. We hope you found our tips helpful. Good weather and good catch.

How to choose braided cord or criteria the right choice braids

The problem of braided line selection has always been considered one of the main problems when arranging gear in any direction. fishing... Any fisherman always tries to approach the choice of braids thoroughly and for good reason. The result of fishing often depends on the correctly selected braided line, as well as the ability of the spinner in one way or another of fishing.

The strength of the tackle, its sensitivity and information content depend on a well-chosen braided cord. Not all lines are suitable for fishing in difficult conditions. Also, not every braid can be used with any lures and methods of spinning fishing. Therefore, today any angler can safely say that a braided line has an important effect on the characteristics of the tackle and its capabilities in the process of fishing.

The main indicators of braids

When choosing a braid, experienced anglers pay attention to many indicators that the manufacturer indicates on the bobbin. Sometimes these few inscriptions carry a lot of information, which is decisive in the final choice. Also, nowadays, a lot of information and reviews about braided cords can be obtained on the Internet and this opportunity should not be neglected.

In general, the main indicators of braided lines, which determine their purpose and operating parameters, are as follows:

the type of braiding of the cord and the fibers used;
the diameter of the braid and its roundness;
smoothness of the cord surface;
abrasion and wear resistance.

Let's consider each characteristic in more detail.

Weaving type

All braided lines are divided into two large groups, which are characterized by the way the fibers are woven.

Classic weave cords. In this case, all the fibers of the braid are intertwined. Each manufacturer has its own weaving technology, which determines how the product will turn out at the exit. The weaving method, its quality and density determine the roundness of the cord section, its strength characteristics and other important characteristics.
Soldered or sintered cords, in which the fibers used are not intertwined, but are placed parallel to each other and then soldered in a certain way. Each sintered cord manufacturer uses different heating technologies and different bonding materials to determine the elasticity, roundness, strength and other parameters of the braid.

In general, there is not much difference when choosing a multifilament fishing line of a particular group. First of all, the parameters of the line are important, which determine its direction and the ability to work in the given fishing conditions.

Diameter

Each manufacturer on a reel with a braid must indicate the diameter. But, if for nylon fishing line the diameter is a fundamental indicator and it is easy to calculate, or rather, to measure in the simplest ways, then the diameter of the cord is not such an unambiguous characteristic.

Firstly, every manufacturer of cords, even an elite one, is guilty of exaggeration. That is, it indicates the diameter is smaller than it actually is.
Secondly, a perfectly round cross-section occurs mainly in braids from the elite segment, and inexpensive laces usually have an oval cross-section or are completely flat.

Obviously, it is virtually impossible to measure such a diameter, but in reality it is only possible to calculate some average value. Therefore, when choosing a braid, it is always worthwhile to visually evaluate its roundness and diameter, as well as touch and twist with your fingers - a flat braid is immediately felt tactilely.

Another thing is the load that can withstand braided fishing line... Usually the manufacturer indicates it in pounds (lb) and less often in kilograms. Well-known manufacturers value their reputation and try to indicate the most honest values. It is also very important how the braid holds the load on the knots.

Any knot will not work for all cords in a row, so it is better to pay attention to the manufacturer's recommendations. The durability of the braid is also important, since there are cases that after a season of intense fishing, the cord simply starts to “crumble”. Previously, this was especially often observed in eight-core braids, and even very expensive ones.

Smoothness of the surface

The length of the cord depends on how smooth the surface is. For fishing from a boat, this parameter is not so important as when fishing from the shore. Smooth braid allows you to cast lures at very decent distances, which is required when coastal jigging. The same qualities will be demanded by asp fishing, in which the maximum casting distance is a decisive factor in successful fishing.

Abrasion resistance and wear resistance

This indicator is important when fishing in difficult or extreme places. An abrasive-resistant cord is required by "horsemen", who are often caught in strong snags, where the line is constantly in contact with the branches of flooded trees. Also, such braids are used when fishing on the bottom, overgrown with shell rocks, or stony and pebble areas.

Which cord to choose

So, the selection of braids must be carried out for a specific fishing method and conditions, paying attention to the parameters discussed above. The price of a cord naturally determines its quality. If for some reason the spinning player cannot allocate a decent amount for the purchase of an expensive braid, then you can pay attention to Sufix, Salmo lines, the Sunline budget segment, the famous Power Pro also costs a little. Among the elite woods, one cannot fail to note Varivas, YGK, Seaguar, the expensive segment of Sunline.

Edward Ball - Especially for the site SamodelkiFish - fishing, Ukraine, Kiev

Lure tee - sharpen or change?
Crucian carp and feeder fishing

In addition to standard fishing rods, manufacturers offer fishermen a huge selection of tackle for every type of fishing. It also includes a variety of line options - for summer or winter fishing, as well as common fishing lines.

Where to buy a braided line for fishing

This type of fishing thread can be purchased from the X-FISHING online store. We offer a large assortment of this type of high quality tackle, which will become an essential accessory for successful fishing.

Peculiarities

This type of fishing line is a thin braided cords, the main parameters of which are:

High breaking load in comparison with a standard line of the same diameter - ensures the strength and reliability of the product;
Lack of extensibility;
The diameter, or rather the thickness of the cord, since it is not perfectly round;
Weaving method. The nuance here will be the number of threads and their thickness - usually in a skein there are from 3 to 8 pieces.

The advantage of such a fishing thread is its resistance to stretching, which is important for sharp and strong striking.

It can also be used for ice fishing, since the braid combines the characteristics of fineness and maximum strength. It will be useful when hunting cautious and large fish. But there is a significant disadvantage - in severe frosts, the possibility of frosting of the thread appears.

Choosing a braided line

It is better to start the selection of this tackle with a discussion of the fishing conditions, since for long casts, in their absence, for light or heavy baits or overgrown bodies of water have their own types of braided cords.

For example, this line is perfect for jigging because of its zero stretch.

It is worth paying attention to the number of threads in the winding - the more of them and they are thinner, the more difficult it is to weave them, and, accordingly, the price will be higher. But the quality of such cords is not always good. the highest level, therefore, sometimes 5-6 threads in a high-quality strapping are enough. It should be dense and strong, which will increase the strength of the line and the range of its casting. Paying attention to the color of the line, it is worth remembering that its durability and brightness reduce the retention of strength at break. And a special impregnation of the cord slightly adds diameter, but makes it more dense and close to a round shape. True, such coatings are not always durable.

Manufacturers

Market fishing tackle has many brands that offer similar products. Here is some of them:

Zenag;
Berkley;
Gozen;
Kureha;
Power Eye;
Spider;
Black Hole;
JigMaster;
Daiwa;
Power Pro;
Sufix;
Stinger;
Toray;
Stren;
Pontoon 21;
Shimano.

By choosing the right line, you can get not only a good catch, but also high quality tackle for a long time.

I'm already familiar with Bobbing products. (I have several braids of different diameters) And I even did a review on So when I saw a discount on this braid, 300 meters long for a little $ 9, at a sale, I bought it without hesitation.
It was in the summer. The package with the braid arrived pretty quickly, but it stuck in my fishing box idle.
But with the arrival of winter, I found a use for it. And I liked this application. But first things first.
The braid came in a rather crumpled box. Do not know. Either the store has already sent this, or suffered on the way:

Braided coil inside:

More precisely, three coils, connected together, with a wound braid of 100 meters each:

The peculiarity of this braid is its color. Changing every meter. As a result, at 300 meters we have a beautiful rainbow:

This coloring was made for a reason. It is needed to control the length of the braid. Convenient when trolling and casting a spinning rod.
The braid itself is quite thin. I have nothing to measure its thickness with, so I can't say for sure whether there is 0.12mm there or not:

I liked the quality. The braid is not shaggy, visually has the same thickness along its entire length.
Really very resistant to tearing. I could not tear it apart with my hands. She begins to cut her fingers, but does not want to tear. This gives hope that there will be no problems with not very large specimens of perch and pike (which prevail in our area). They will not gnaw or bite off.
This time I decided to use the braid in the zherlitsa. Many fishermen are very fond of the first winter ice. And I am no exception. At this time, you can catch quite a lot of still actively feeding pike.
Therefore, for the trial I bought two zerlitsa offline:

And he equipped them with an observable braid:

Since the braid is very strong, you have to cut it with this tool:

I didn't wind all 300 meters. Limited to only 1 coil out of three. This is about 50 meters for each zherlitsa:

Although, in fact, I did not wind exactly, and most likely it turned out about 30 and 70 meters on two reels.

I went fishing last weekend. And as you know, most often fishermen have biting either yesterday or tomorrow. But today it does not bite. So my trip was not very successful for the catch. I caught a few okushka on the balancer:

And a very small pike, 600 grams, which pecked exactly on the neck with monofilament:

(while I had 8 girders installed) But in defense of my fishing feeling is the fact that it was one and only pike among a dozen fishermen who fished nearby.
Based on fishing alone, I can already draw one conclusion in favor of the braid: it is much better seen on white ice, in contrast to the fishing line. This makes it easier to find and unwind. Definitely now I will put a braid on the vents. Fortunately, I have it with a margin.
But the remaining 200 meters of this particular braid will probably not go to the girder, but to the recently arrived new multiplier reel PisciFun Torrent.
That's all. I am finishing my review. There will be no particular conclusions. The braid is good, the price is comparable to the offers offline, but at least I have come across Bobbing, and it suits me. I probably won't recommend it. Not because it is bad, but because there are a lot of fishermen here (judging by the comments to the previous reviews) and everyone has their own preferences. I just talked about mine. Therefore, not a tail for everyone. And good catches.

I plan to buy +7 Add to favourites I liked the review +32 +41