(rubber). Polyurethane frames are harder and more durable and are preferred for good quality asphalt.

The rubber frames roll softer than polyurethane ones and if the asphalt is not of very good quality, then they are more suitable.

V recent times, roller skis with composite platforms have appeared, which can significantly absorb vibration from uneven roads, as well as roller skis with inflatable wheels for roads of any quality (off-road). But the price of such roller skis can reach ten thousand rubles, so not every athlete can afford to buy such roller skis.
Rollerski are usually divided into two classes: roller skates and skating skates, and they, in turn, are roller skates for training and racing (speed) roller skis, although there are also combined types that combine the advantages of both classes.
Rollerski for training helps the athlete to master ski run because the wheels of these roller skis are usually made of rubber to reduce vibration and increase traction, allowing the athlete to focus on skiing technique.
Rollerski for racing (aka high-speed roller skis) allow athletes to reach high speeds, so their design assumes a rigid, straight or upward curved platform to increase stability, and the wheels have a larger diameter for free passage of cracks and other obstacles on the road, and a smaller width for you were fast. Wheels can be made of polyurethane to increase rolling resistance.
Currently, with the deep penetration of the Internet in Russia, it is not difficult to buy a suitable model of a roller ski with an installed ski mount anywhere in our country. But how to choose from a wide variety of roller skis models that are produced by world and Russian manufacturers (to which the company belongs), what suits you best.

Vthe choice of roller skis for classic move

The main difference between classic roller skis is the ratchet mechanism installed on one of the pairs of wheels, which blocks backward rotation. The platform length of classic rollers is longer (more than 68 cm) to stabilize the course while driving, and the rubber wheels are wider for increased stability (more than 4 cm). The wheels are usually small in diameter so that the roller skier platform is not high above the ground, then it will be easier for the athlete to maintain his balance while riding. This configuration of roller skis provides the athlete with a comfortable ride during training in a classic way.

Roller skis (type "Elpex") can serve as an example of classic roller skis: lightweight aluminum alloy frame 685 mm long, soft rubber wheels with an installed locking ratchet 40 mm wide and 70 mm high, withstand athlete's weight up to 90 kg.

The choice of roller skis for skating

Roller skis have narrower wheels and shorter frames than classic roller skis.
An example of skate roller skis can be the "Shamov" roller skis (type "Start" models,): with polyurethane wheels 80x28 mm, or rubber 70x30 mm or 80x30 mm.
These rollers have a lightweight aluminum frame (center distance 590 mm) and can support an athlete's weight up to 90 kg. Also, these models have composite frames (with steel "forks") withstand the weight of the athlete over 90 kg.

Roller ski model for skating (type "Marwe"), has a maximum high wheels made of rubber with a diameter of 100 mm and a width of only 24 mm, which reduce the total friction of the rollers with the road. These rollers also have good grip on the asphalt and are great for training.

Roller skis (roller skis) were developed as a simulator for skiers in the off-season without snow to recreate a similar skiing workout. Appearing once as a device for summer workouts skiers, roller skis soon became so popular that they themselves became a seasonal discipline. More and more ordinary people and outdoor enthusiasts choose this type of transport for walks.

The difference in price between the models is very high, and the roller skis themselves cannot be called an affordable purchase, so you need to clearly understand what to choose, with what characteristics and what this or that type of simulator gives. All this you will find in the rating of the best roller skis of 2018 according to the reviews of professional athletes and amateurs.

	Name	price, rub.	Briefly about the main thing
			The model is used in summer championships world biathlon and world championships.
			Basic training model for skating style. Comfortable and lightweight for training work of different intensities, also suitable for competitions.
			For racing and training skating... Holes for fasteners were drilled in advance on the platform.
			The resilient platform dampens vibrations even on the roughest asphalt and gives an excellent "snow feel".
			For training in a classic style. Used by the Norwegian national team for training.
			Ideal for beginners and experienced athletes and amateurs skiing.
			With an all-carbon platform that, when pushing off, completely recreates the sensation of skating on the snow.
			Ideal for high speed driving. The platform is lightweight. But durable, does not curl.
			The new professional collection with a lightweight Air Core Composite honeycomb.
			Solid aluminum platform. The model is equipped with mud flaps.
			For skating training for beginners and experienced athletes. Solid aluminum platform.
			Skating rollers for amateurs and elite skiers.
			Classic training pair for teens and children over 7 years old, platform made of wood and fiberglass.
			For weight up to 70 kg, for juniors.

Varieties of roller skis

Rollerski are traditionally divided into two types:

• for the classic move;
• skating course.

Classics and skate, in turn, are divided into:

• training - soft wheels, low speed, well suited for practicing technique soft wheels, low speed, well suited for practicing technique;
• racing (high-speed) - hard wheels, a light weight suitable for competition.

Rollerski for training usually have rubber (rubber) wheels and do not allow to develop high speed, which is suitable for beginners, and allows professionals to increase the load. Rubber wheels absorb all the unevenness of the road surface, give good grip.

Roller skis, on the other hand, are designed specifically for high speeds, for which the structure has either a rigid straight or upward curved platform to increase the athlete's stability. Rollerski wheels have a larger diameter for free passage of cracks and bumps on the road, and a smaller width for speed. Wheels are usually made of polyurethane or rubber, but with a large diameter.

The main difference between classic roller skis and skating skis is a ratchet (braking) mechanism installed on one of the pairs of wheels, which blocks rollback. The platform length of classic rollers is longer (more than 68 cm) to stabilize the course while driving, and the rubber wheels are wider to increase stability (more than 40 mm). The wheels have a small diameter, so that the height of the roller ski platform above the surface is insignificant, then it will be easier for the athlete to maintain his balance while riding. This configuration provides the athlete with a comfortable ride during training in a classic way.

They differ in the large diameter of the wheels (150-20 mm) and the presence of an internal chamber. It is recommended for children and beginners to use roller skis with wheels of small diameter up to 70 mm. Large diameter wheels from 100 mm are narrower and less stable, which requires a fairly confident mastery of driving technique. Equipped with braking system and additional auxiliary wheels for stability.

Marwe 610A (7)

Lightweight, high-quality skating-style training skis on an aluminum platform. Marvel equipped with high wear resistance polyurethane wheels.

The Marwe 610A can be equipped with different wheels with different rolling resistance, which determines specific training goals:

• R - racing wheel for competition;
• S - very fast for sprint training;
• 0 - fast, simulating ski gliding on icy snow or firn;
• 6 - standard, imitation of ski sliding on cold snow;
• 7 - slow, imitation of ski sliding on wet snow;
• 8 - very slow for strength training.

Marwe 610A (7) are equipped with model 7 wheels - slow, imitating ski sliding in wet snow.

Specifications:

Dust and waterproof bearings 608 2RS. Manufacturer Marwe, Finland.

Designed for practicing skating techniques on asphalt. The lightness of the Start Skating 71 roller skis and the impeccable shape of the wheel allow you to train more efficiently. Polyurethane is characterized by greater rigidity than rubber, more responsive to lateral shock and much less wear and tear. Good quality polyurethane guarantees excellent handling and grip, even on wet asphalt.

The Start Skating 71 is offered as a basic skating training model. Comfortable and lightweight for training work of different intensities, also suitable for competitions. Roller skis are close to swenor # 1 wheels in speed, but faster.

Specifications:

A budget model with an aluminum skating platform. Suitable for training adults and juniors. It is completed with wheels No. 1 and No. 2. Wheels # 1 are intended for competitions and have a significantly lower resource than # 2. Mud flaps are included in the scope of delivery. Made in Norway.

Specifications:

There is a ratchet mechanism on the rear wheels. It only allows you to roll forward, thus creating a gripping effect. The downside is that the rollers "hold" always and with any technique, ie the jerk technique with the classic move is difficult to work out on them. In addition to the mechanism, classic rollers have a longer frame from 700 mm and wide wheels. This design makes them more stable.

One of the most famous models for the classic ride, perfect for training in practicing skiing techniques in the warm season, for training skiers of all levels of skiing, thanks to the wide wheels that provide better stability.

ELPEX Wasa 610 classic No. 2

The Elpex Wasa 610 aluminum frame is lightweight, highly durable and reliable, with optimal flexibility. Rubber wheels ensure optimal contact with the surface in classical technique and give the skier stable handling, are distinguished by high abrasion resistance. The kit includes mud flaps to protect the skier from dirt when riding in wet weather. They have a built-in special mechanism Reverse Lock, which blocks the rotation of the wheel backward.

Specifications:

There are three types of training wheels available in the Wasa 610 collection:

• standard (No. 2),
• slow (no. 3),
• very slow (# 4).

Various combinations can be used on the same platform, allowing a wide range of speeds and loads to be tailored to the specific needs of the athlete.

They are used for training in the classic style of movement on an asphalt surface. The optimally selected rubber compound ensures comfortable riding on uneven roads and excellent grip on wet and wet surfaces. The platforms and forks are the same for all CLASSIC Ingvild Edition models. The locking mechanism is located on the rear wheel.

The IDT CLASSIC Ingvild Edition line includes 3 models that differ from each other in rolling resistance and training goals:

• RM2 - Medium Rolling Resistance ("standard" rollers), recommended for most users.
• RM3 - high rolling resistance ("slow" rollers), recommended for advanced skiers, for strength work.
• RM4 - Super high rolling resistance ("very slow" rollers), recommended for advanced skiers.

This model is used in training process the Norwegian national cross-country skiing team.

Ideal for beginners and experienced athletes and ski enthusiasts, they can be used for both training and competition. The rubber used to make the rollers is softer than polyurethane. This property allowed Elva models to smooth out minor irregularities in the road surface and significantly reduce vibration transmitted to the athlete's feet.

Specifications RM4:

They have a frame length of 600-650 mm, which affects control and balance. The longer the base, the more straightforward the movement, therefore, it is easier to maintain balance and dampen vibrations. The frame can be rigid and flexible. Flexible frames correspond as closely as possible to the work of a real ski (for practicing skiing technology). The hard ones handle better and are needed in racing and high-speed models.

RAY Carbon Skate rubber wheel (No. 2) 100x24 mm, slow rubber, with box

For skating, RAY Сarbon Skate is the first roller skates produced in Russia with a platform made of 100% high-quality carbon (carbon fiber). The flexible curved frame (platform), when pushing off, creates a sensation similar to the sensations of a skier when skiing on the snow and allows you to reproduce the technique of skating on skis. The high center of gravity of the roller skis allows you to practice your skating technique and balance.

RAY Carbon Skate

Oversized wheels with No. 2 rubber provide a soft ride and sufficient speed, excellent grip on wet asphalt and excellent handling. Suitable for competition, speed training. Conveniently, the spring platform absorbs vibration, reducing the load on the musculoskeletal system. The wheels are attached to the frame with aluminum forks.

Specifications:

Includes plastic fenders (mudguards). Frame warranty 1 year.

Perfect for both professionals and novice athletes. Lightweight, stable, reliable, training roller skis for skating. Powdered aluminum included in the platform provides lightness, but at the same time rigidity of the structure, preventing twisting. All SRB roller skis are drilled to accommodate standard SNS and NNN bindings.

Wheels are made of wear-resistant rubber that reduces vibration and provides optimal grip on wet and dry surfaces. Skate Alus are characterized by good maneuverability, safe glide and ski-like behavior. The center of gravity has been shifted by shifting the wings downward, providing a stable ride.

Specifications:

Professional skating model. New lightweight Air Core Composite honeycomb core. The special platform design dampens vibration and ensures a comfortable ride. Razor Shape Base technologies. The platform has a high ground clearance, which makes it possible to better overcome possible irregularities on the track.

As the coaches note, these are rollers for athletes of a level much higher than average, with a powerful push and capable of traveling 30 meters on at least one leg. Objectively, this is the merit of not only the skaters themselves, but also the bundle of boots-bindings-roller. They sit very tightly, and this is good for those who have equipment.

Specifications:

Until recently, only skis were presented on the official website of the Fischer company - it was and remains the absolute leader in the production of winter ammunition. In just 5 years, Fischer has soared to the TOP-sellers of roller skis as well.

For beginners, experts recommend choosing the "classic". This is the most comfortable low-speed version with wide wheels for stability, a flexible frame from 70 cm that imitates real ski, and a reverse lock. As you master the technique and balance, you can move on to "faster" options and skating.

Shamov START rubber, 70 mm

Designed for skating training for beginners and experienced athletes. Solid aluminum platform. Used for boots with SNS soles and fitted to racing, jogging and walking skis and also for roller skis of all modifications. The system of fastening the boots in the Shamov models is mechanical.

Shamov START rubber, 70 mm

Specifications:

The kit includes mud flaps.

This model is recommended for skating trainings, for which slow wheels are installed. Roller ski platform made of composite material with an additional layer of carbon, due to which it has become stiffer, which gives a complete recreation of movement on a snow-covered ski track.

The main difference from previous models is the fork. Its design makes it possible to transfer body weight and push not directly from the fork to the platform, but first from the fork to the rubber pad and only then to the platform. When skiing, they go softly and smoothly and, in their quality, bring the roller skis closer to the skis.

Specifications:

A model with a unique design and minimal weight. Swix Triac IPM technology provides exceptional torsion and bend performance. The low center of gravity of the composite platform provides a ski-like experience on the snow. The base of the platform is reinforced with Kevlar fiber for strength and protection of the carbon fiber structure. The new, elongated shape provides excellent splash protection when it rains.

The low center of gravity increases maneuverability and ease of handling. The model has increased torsional rigidity due to reinforcement with Kevlar fiber. Reflective elements installed. On the platform there are pre-drilled holes for fastening the SNS / Prolink / Rottefella system. Vibration damped mud flaps included.

Specifications:

For children, they also choose mainly classic ones with rubber wheels with a diameter of 70-80 mm. Rubber will not allow you to accelerate much and will absorb all road bumps.

Swenor Carbonfibre Cap 3

SWENOR was the first to produce samples on a fiberglass platform in an arc shape with a trimmed heel and toe. It cushions underfoot, which provides a softer operation than aluminum, better dampening vibration.

The aluminum platform works harder, which is not very pleasant on poor surfaces, but provides better energy transfer when pushing off. That is, in the race, aluminum has an advantage over fiberglass.

Swenor Carbonfibre Cap 3

The model is equipped with wheels of your choice:

• fast number 1;
• standard No. 2;
• slowly # 3.

Specifications:

Mud flaps included.

One of the few offers on Russian market for teenagers and juniors. Designed for an athlete's weight up to 70 kg. The rubber wheels absorb vibrations, maintain good traction and prevent roller skis from accelerating too quickly - this adds confidence and control during training. The wheels have a small diameter, but a large width. This provides greater stability.

Specifications:

VIDEO: Choosing the first roller skis

The catalog site contains models for different riding styles:

• ridge;
• classic;
• off-road.

In addition to products famous brands SWIX, SWENOR, START, ELPEX, KV +, SRB, MARWe, whose inventory is used professional athletes, the store has roller skis of the Russian manufacturer - the SHAMOV company.

Comparisons and differences

Distinguishing classic roller skis from skating skis is easy.

The following wheel sizes are popular:

• 70/80 * 30 mm;
• 100 * 24 mm - like roller skates.

Distinguish express and training roller skis.

If you do not know which skaters to choose, then give preference to high-speed ones. They are designed for maximum riding pleasure. It is speed roller skis that are used in racing.

The practice roller skis simulate skiing in the snow. Athletes train on them in the off-season in preparation for ski season... The riding speed on them is comparable to winter skis.

How to choose roller skis

Beginner skiers have questions:

• Which skis are better to buy?
• How do the classic ones differ from the skating or off-road ones?
• Is it possible to ride the same roller skis in different styles - use them as universal ones?
• What is the difference between imported products and Russian ones? Why is overseas more expensive and better?

Answers to these questions can be obtained from store managers. All of them are not just sellers, but also active athletes-skiers. Their advice is based on personal experience and in-depth knowledge of the characteristics of the inventory being sold.

In the corresponding section of the catalog you will receive comprehensive information on the criteria for choosing inventory for technical specifications, the manufacturing company, the level of training of the athlete and the planned use of roller skis.

Why us

Security

Winter is coming to an end. There is no way to get away from this. Skiers begin preparations for the next season. Roller skis are one of the main training tools. Someone trains on already explored tracks and circles. Someone is discovering new horizons in the form of new places for training. I hope this information will be useful to those who will train on roller skis, especially in new ones or not. quiet places. Roller ski braking is always a must.

There are 8 methods of braking:

1. Stepping over the plow
2. Plow
3. Snake
4. Air flow, opening up
5. Using the curb with one roller
6. T-shaped
7. Drive to the side of the road (in case of emergency)
8. Ski poles

Robin Brintessun, a Swedish skier, sprinter, talks about this in a fun and positive way. Very clear. Even translation is not required.

Here are some comments from Alexey Shchepetkin:

Not all methods are suitable for braking at high speeds, because the slightest mistake can lead to loss of balance and fall. In my opinion, only 2 methods are suitable for such speeds: open and T-stop. The first option without loss of balance can be used by any beginner, but the effectiveness of such braking is rather low. The second option is very effective. To do this, you first need to learn how to confidently ride on one leg, maintaining balance. After that, proceed to working out this braking technique. The disadvantage of this method is significant wear on the wheels, but, you see, your life is more expensive.

The rest of the methods (with the exception of the completely useless method of braking with sticks on the asphalt) can be used at low speeds. Even such exotic things as rolling one roller on the side of the road and going into a ditch have a right to exist. For example, Andrei Kukrus, the winner and medalist of the Roller Ski World Cup stages, at one time in training sometimes jumped at full speed from the asphalt onto the lawn (over the curb), drove or ran on roller skis for some distance, and then jumped down onto the asphalt and continued his usual movement. Once at Poklonka I had to avoid collision with a child in this way. The trick was a success, no one was hurt. On the contrary, the lack of such a skill in one of the famous Moscow veteran roller skis led to a collision with a bus in one of the parks in Moscow, although the athlete had the opportunity to go to the lawn.

Pay due attention to working out the methods of braking! And remember the well-known commandment of motorists: "brakes are your life"!

Take care of your health, follow the traffic rules and try to train in a safe mode.

Let's make a reservation right away that it is most profitable to buy roller skis from us. And this article was written for that growing category of people who, not being active athletes, do not want to part with their skis for the summer season, and are ready to buy themselves roller skis. Also, we will not dwell, in this article, on special roller skis for soil or for roller ski racing.

So, the first choice you need to make is your roller ski style. The choice of the style of roller skiing in Russia depends, among other things, on the place of the intended skiing. If you are planning to learn roller skis on road, and not on a safe roller ski track, we would recommend staying on the classic style, since you will need a much smaller track width than in the skating style. According to the style of skiing, as in skiing, roller skis can be both skate and classic.

You can even distinguish one from the other purely outwardly.

Classic Roller Skis I have a longer, usually about 70 cm platform and a small diameter, but wide, stable wheels. The rear pair of wheels of such roller skis usually have a so-called overrunning clutch or ratchet, which allows the roller skis to push off the asphalt.

Roller skis usually have a shorter platform, about 60 cm, and most often polyurethane wheels. Typically, the wheel diameter of such roller skis ranges from 70 to 100 mm, and the width is from 2.5 to 3 cm.

All roller skis consist of a platform, a pair of wheels and of course ski bindings.

The choice of ski bindings for roller skis is less democratic than for skis. If you used an amateur bindings in winter, then on roller skis we recommend considering more professional bindings for better control. The reasons for this are as follows: higher speed, higher balance requirements, more weight Roller skis relative to skis and therefore greater control requirements (the price of roller skis falls on asphalt is always higher than on snow skis).

The choice of wheels is more relevant when choosing roller skates. A roller ski wheel consists of an aluminum (less often plastic) rim and a rubber or polyurethane tire.

Wheel material... Rubber is a softer, cheaper and less wear-resistant material. In addition, rubber is afraid of UV rays. Usually slow wheels are made of rubber, which athletes use for training. strength qualities... The rubber wheels also perform well on wet asphalt. In all other respects, we see the advantages of polyurethane wheels. That is why most manufacturers make roller skis from this material. Polyurethane - plastic with plastic properties can have different hardness factors. The most used polyurethane in roller ski wheels has a hardness of about 80 units. The higher the hardness, the harder, and therefore the faster the roller skis. On the other hand, the harder the wheels, the greater the load on your ligaments and joints. In any case, if you set yourself the goal of achieving some athletic performance You will need both fast (for speed) and slow (for power) wheels for training.

Wheel size... Most often roller skis have wheels with a diameter of 70-80 mm and a width of 30 mm or an enlarged wheel with a diameter of 100 mm and a width of 25 mm. Banal logic says that a wider wheel will be more stable and more wear-resistant, and a narrower one will be more convenient for pushing off, but initially requires more balance from you. Some manufacturers, most likely, in order to reduce the cost of the product, produce wheels for roller skating skis, the tire of which has two radii, along the edges, and a flat middle part. The jerk on these roller skis is somewhat blurry. And seemingly great stability very soon leads to uneven wear of the wheel. Then the roller ski starts to "lead" to the side. In our opinion correct shape roller skate tires - with one radius equal to half the thickness of the wheel.

The choice of wheels for roller skis in Russia depends, among other things, on the place of intended skiing. If you are planning to ride on not very smooth, bumpy asphalt, roller skis with wheels with less rigid tires and larger diameter are better for you.

Platforms Roller skis are flexible and rigid. Rigid platforms, most often made of aluminum alloys, make it easier to maintain balance and confidently handle the roller ski. Flexible platforms, most often made of plastic, give a greater ski-like feel and dampen vibrations. Due to the materials used, flexible platforms are usually less durable. Platform length or wheelbase (distance between the axles of the front and rear wheel) also affects control and balance. The longer the base, the more straightforward the movement, therefore, it is easier to maintain balance and the more vibrations are damped.

Price Roller skis can range from 3 to 20 thousand rubles, and is determined by the country of production, brand, honesty of pricing and quality of the product. + Roller skis are a product that does not depend on your height, age, weight and eye color, which allows you to profitably buy roller skis in the online store.

We hope that our article will help you choose the right product for yourself and make the right and right purchase. We are ready to buy roller skis - we will advise you in more detail.