Homemade accessories for fishing and hunting. DIY master class on making a feeder chair

Every avid fisherman should have one on which he will sit by the reservoir and fish. The presence of such a piece of furniture will make fishing more comfortable and enjoyable.

Some people think that you can do without a fishing chair. But if you plan to fish for a long time, then you cannot do without it. Moreover, it is not at all necessary to purchase a ready-made chair in the store. It is quite easy and simple to do it yourself from improvised means.

Concerning design features, then the chairs for fishing are:

Whichever option you choose, the fishing chair should turn out to be:

durable;
sustainable;
small in weight;
compact and mobile;
easy to manufacture;
convenient to use.

But it is worth noting that folding models are considered the most popular among fishermen. They do not take up much space and are easy to carry from place to place. Most often, such products are made from wooden slats, metal pipes and plastic parts.

Attention: in the process of making a chair, you should take into account your own weight and height.

Material selection

You can make a fishing chair from any material. The most popular are:

Drawing

Before making a fishing chair, it is better to make a drawing of it. So it will be more convenient for you to cut the materials and assemble the structure into a single whole. What is a blueprint? This is an image of a future piece of furniture in three different projections: front, side and top. In this drawing, it is necessary to indicate the number of parts, their exact dimensions and options for attaching individual elements to each other. The optimal sizes of a chair for fishing are:

width from 270 to 500 mm;
height from 270 to 470 mm.

Almost any fishing chair will consist of the following elements:

two legs;
backs with legs;
seating;
bolts.

Some models are equipped with armrests, footrests and other accessories. But these are already more complicated and expensive chairs for fishing.

reference: a competent drawing will allow you to calculate how much consumables will come in handy in the process of making a chair.

Instruments

Of the tools in the process of making and assembling a wooden fishing chair you will need:

Of the materials will come in handy:

lumber;
bolts and nuts;
paints and varnishes;
brushes.

How to make a folding fishing version out of wood?

Let's take a look at making the simplest 4-post wooden fishing chair. To do this, we need several wooden beams with a square section of 35 - 40 cm, from which the legs of the product will be made. The process of making a chair will look like this:

In order for the chair to last as long as possible, it should be treated with antiseptics and covered with a water-repellent varnish in two layers.

Attention: To make the folding fishing chair easy to fold and unfold, you need to correctly adjust the bolt tension.

Simple fishing pvc plastic pipe structure

This version of the chair is assembled in a matter of hours according to the following scheme:

Photo

As a result, you will get a product that looks like the following photos:

Useful video

A detailed description of how to make a chair out of wood is presented in the video:

An example of making a chair from PVC pipes shown in the following video:

Conclusion

In conclusion, it is worth noting, no matter what option you choose, a hand-assembled fishing chair will delight you not only by saving your own savings, but also by its practicality, convenience and attractive appearance. Each individual stool design is comfortable in its own way and it will satisfy all the needs of its owners.

In contact with

Folding fishing chair homemade. A simple and practical folding chair for fishing with your own hands: drawings, photos.

This homemade product will be useful primarily for fishing enthusiasts, because fishing requires perseverance, sometimes you have to sit for several hours at a fishing rod, so today we will start making a chair for fishing.

A fishing chair should first of all be foldable so that it does not take up much space and fits in a backpack. Also, the angler's chair should be lightweight, which means it is made of durable and lightweight materials.

And the most important thing is the simplicity of the design of a fishing chair, purchased options made of plastic and thin tubes are very unreliable, such chairs quickly break down, and they constantly have to be repaired and improved.

This homemade fishing chair is so simple it won't be difficult to do it yourself.

The folding chair consists of only three parts, and the folding mechanism is extremely simple without any hinges or joints.

Fishing chair blueprints.

The figure shows the drawings and dimensions of the chair, the dimensions are selected in such a way that the unfolded chair fits in the backpack, the dimensions of the chair can be changed at your discretion.

As you can see in the pictures, to make a chair you will need two pieces of chipboard or thick plywood with dimensions of 400 x 300 mm and a thickness of 12 - 18 mm.

As a seat for the chair, you can use a thick 300 x 350 mm fabric, such as a tarp, or cut a piece from old carpet.

We cut out the parts of the chair from chipboard or plywood with a jigsaw, it is important that there is no large backlash at the junction of the chair parts, the parts should be tightly connected.

If desired, the legs of the chair can be painted immediately.

The next step is to attach the seat, everything is simple here. We take a piece of dense material and attach it to the edges of the chair legs with short self-tapping screws with wide caps. When unfolding the chair, the legs are kept from folding with a thick cloth.

DIY folding fishing chair is in no way inferior to purchased counterparts, and even surpasses them in strength and reliability.

DIY fishing chair

The fishing chair is an indispensable attribute for calm and comfortable fishing. Of course, there are times when you have to sit on a log, stone or found spoiled bucket, but staying all day on one of these "seats" is fraught with both comfort and health. Therefore, the best option to avoid all these inconveniences is to purchase or make a do-it-yourself fishing chair.

Fishing Chairs

Characteristics of fishing chairs

Fishing chairs are divided into types according to the following criteria:

folding;
stationary.

Materials for their manufacture

Stationary chair does not add up, which is why it is not in demand, since inconveniences arise during its transportation.

Folding chair option is in great demand, since it is easy to transport and has a large assortment - in terms of both equipment and materials for its manufacture. They can be divided into two main subspecies - with and without a back.

The legs when choosing a chair also have great importance, the stability of the chair, a comfortable and confident stay on it depends on them.

The simplest and cheapest type is tube legs. Their main drawback is their uneven digging into the ground, which causes the chair to tilt in an unknown direction.
The next type is crossed legs in the form of frames. They are more stable and hardly buried in the ground. A chair with such legs pleases not only with its stability, but also with an affordable price.
The most expensive option is a chair with legs with wide rests. This type allows you to adjust them in height and install them on any surface.

As for the material, it should be lightweight and durable. The best option is aluminum. It has advantages such as light weight, strength and corrosion resistance. The tree is also considered good stuff for the manufacture of chairs.

The seat of the chair should be made of a sturdy and preferably waterproof material such as tarpaulin.

Folding chairs can be additionally equipped with armrests and a side table, but when choosing a product, it is better to pay attention to the folding armrests, which, if necessary, will not restrict movement.

Chair with armrests and side table

You can not only purchase a chair for fishing, but also make it yourself. In order to answer the question "how to make a fishing chair with your own hands" (with or without a backrest), you need to consider the main steps for its manufacture and follow them sequentially.

Step-by-step instructions for making a fishing chair

A chair for fishing with your own hands is not so difficult to make, adhering to the rules and advice of experts. Manufacturing can be done in several ways, depending on the type of chair.

Tripod design

This design is the most common and easiest to manufacture.

This will require:

wooden slats - 3 pcs. Section 2.5 by 2.5 cm, length 43 cm;
a piece of sturdy cloth or tarpaulin;
a metal plate that will act as a connection element;
3 bolts, nuts and washers.

In wooden slats, holes are drilled in their center to fit the size of the bolts for their fastening;
Three holes are made in the metal strip, also matching the diameter of the bolts;
The plate is bent into a hexagonal shape, screws are inserted. When bent, its ends are overlapped. The bending must be done so that the heads of the inserted bolts are in contact with each other inside;
After making the frame, the seat itself is sewn. A triangular segment is cut out, its edges are processed. Special pockets are sewn along the edges, into which slats are inserted. For strength, the seat is made of several layers of fabric;
After completing the assembly process, the product for long-term operation must be varnished or other finishing materials.

Wooden folding fishing chair

A chair made according to this scheme is in demand and is more stable and durable than a tripod chair. Before making a chair, you need to prepare the necessary elements.

The process starts with making the legs. These are wooden blocks of a square shape, 36 cm long. Their cross section is 2.5 by 2.5 cm. Quantity 4 pcs .;
Next, 2 bars are prepared for sitting, their cross-section is the same as that of the legs, 29.5 cm long;
For fixing the seat, rails with a section of 3 by 1 cm and a length of 30 cm are used;
To ensure the lateral rigidity of the chair, a 19.5 cm long bar with a cross section of 4 by 2.5 cm is used. Its installation will be at the junction of the legs;
For strength in the lower part of the legs on one of the sides, a rail will be attached, length 30 cm, section 2.5 by 1 cm.;
Having prepared the necessary parts, you can proceed to their assembly.

Holes are drilled in a short bar, the radius of which depends on the size of the bolts used for fastening;
Cross holes are made across these holes for the washer and nut. They can be made both deaf and through;
Moving on to the assembly of the seat. 1.5 cm recedes from the end of the bars and the first rail is attached. All subsequent ones are attached in increments of 1 cm;
Next, bolts are installed that connect the legs to each other and to the seat;
For strength, an auxiliary rail is attached to one side of a pair of legs;
At the end of the assembly, the chair is placed on a flat surface and bevels are marked on the lower parts of the legs, which are then sawed off;
After finishing the process, cover the chair with varnish or other finishing material.

Fixing the legs in working position

To summarize, it can be noted that a fishing chair is essential for comfortable and healthy fishing. When purchasing it, you need to take into account its main characteristics - whether it folds or not, the strength of the legs and the entire material as a whole, and whether it has a back. A chair can not only be purchased, but also made by hand. If you follow all the recommendations and sizes, the product will turn out to be no worse than the purchased one.

How to make a folding metal fishing chair with your own hands

Those who love to fish have to be in one position for a long time. Alternatively, you can simply sit on a grass, log, stone, or sand. However, staying in this condition for a long time can lead to back and leg pain, as well as be harmful to health. Therefore, a real fisherman cannot do without such an attribute as a folding fishing chair. There is a selection of such products in stores, but they cost a lot. At the same time, it is very easy to make a fishing chair with your own hands.

Even a beginner can cope with this task. This will require the simplest and cheapest materials. And if you have scraps of wood, aluminum pipes and old tarpaulin, then making such a seat is even less expensive. So, first you need to familiarize yourself with what chairs for rest and fishing are, as well as their main characteristics.

What should be the chair

To sit while fishing was really comfortable and safe, the chair must have the following qualities:

strength;
stability;
light weight;
simple manufacturing technology.

It is worth considering your weight so that the structure does not break during use. The fisherman will need to sit on all sorts of surfaces (sand, uneven slopes, muddy banks, loose ground). Therefore, the chair must be stable. Compactness is no less important, because often the fisherman carries the equipment on himself. And, of course, making a folding chair for fishing with your own hands should be easy and at a minimum costly.

Varieties

There are the following types of seats:

While it is easier to make stationary structures, folding chairs are the most convenient. They are easier to carry and take up less space. The folding bed is much more practical for tourist purposes. As for materials, what is at hand can be used, for example, plastic parts, wooden bars and slats, a metal pipe.

The simplest type of legs is made of steel or aluminum pipes. However, they have a drawback - they stick into the ground. Metal frames are more convenient, as they are stable. Another option is legs with wide stops that can stand on any surface. Before making a folding chair for fishing and relaxation with your own hands, you should decide how you want to see it and what you have to make it.

Chair on four metal supports

It is very easy to make a stool if you follow the diagram below:

Cut the plastic pipe into 8 pieces. 4 of them should be 50 cm long, and the remaining 4 should be 35 cm long.
Cut two pieces out of a piece of tarp. One will serve as a seat, the other as a lintel to stabilize the stool. Determine the width and length of the material yourself based on your needs.
Take long tubes and connect them in twos crosswise with bolts.
At the top and bottom, attach the long pipe sections to the short ones using plastic corners. Folding stool frame for summer fishing ready.
Take a double-folded piece of tarp and sew it over the top of the structure, which will serve as a seat.
Also fold a thin strip of fabric in half and sew to the lower supports to act as a stopper.
Adjust the tension of the bolts so that the chair folds and unfolds easily.

A stool made in this way is easy to take with you to nature. Well, if you want to make a chair-chair for comfortable fishing, then attach a metal frame to the legs. By the way, such frames can be used instead of pipes. Homemade chair with back

Wooden chair

To make a fishing chair, you need blueprints. It is also important to prepare the parts and only then proceed with the assembly. The bars are fastened crosswise with bolts and nuts. To do this, you must first drill holes in the right places... One pair of legs is secured with a cross bar for strength. After the frame is assembled, it is checked for stability and, if necessary, the excess length of the legs is cut off. Folding chair for feeder fishing must be painted or varnished. You can learn more about the process from the video.

Additional accessories

For successful fishing, of course, you need more than an ordinary camping stool and a fishing rod. The fisherman has a variety of devices that need to be conveniently placed around him. Therefore, it would be wise to make a foldable fishing chair that contains attachments for your rod, fishing tackle and lures. To do this, you can use aluminum pipes, fasteners for them and plumbing fittings. The elements are attached to the legs of the fishing chair. The holder consists of several tubes connected by corners or tees.

Other options

A chair with your own hands is quite convenient, in which there is a drawer for everything you need. It looks like an ordinary cabinet with shelves inside, but its top is the seat itself. It is advisable to upholster it with soft material so that gluteal muscles did not flow from being in one position for a long time. The box can store baits, a thermos, warm clothes. This storage can be especially useful for winter fishing... It is warmer to sit on it than on a regular stool, because the box itself will protect you from the cold coming from the ground. Of course, such a design is not very convenient to carry in hands, but a box for fishing equipment can be transported in a car.

Another interesting option - "two in one" - a backpack chair for effective fishing. An interesting and practical invention, as it allows you to carry a backpack with a chair behind your back at the same time. To make such a design is not difficult at all. To do this, you just need to make folding chairs for fishing without a back from two aluminum rectangular contours, as described at the beginning of the article. You should attach a backpack to the arches. When the chair is folded, it is convenient to carry it yourself along with the bag.

Whatever chair design you choose: an ordinary folding stool, a seat with a back and armrests or a chair-box, such homemade products will satisfy your needs and please the eye, because they are made by hand.

DIY fishing chair - dimensional drawings

Fans of fishing have to take a static pose for a long time, waiting for a bite, so the main condition is to choose the right chair for them.

To settle down on the grass or sandy shore, simply by spreading a piece of tarpaulin, is not the most comfortable and healthy solution. The legs and back are numb, and the dampness of the soil in the coastal zone can lead to colds, which means that a chair is necessary.

The models exhibited in shops of tourist or fishing equipment are not distinguished by a variety and special convenience, and they cost a lot.

A home craftsman, whose hands are familiar with carpentry tools, is quite capable of making a fishing chair on his own. If the house has scraps of wooden bars or aluminum tubes, then a useful homemade product will cost the family budget almost free.

The quality and structure of the fishing chair

In order for a self-made fishing chair to be really comfortable, it is necessary to take into account what qualities and design of the product will be optimal. :

strength.
The chair must support the weight (sometimes considerable) of its owner in order to last long enough, and not become a disposable item;
stability.
The design of the product should provide comfort to the fisherman in any features of the coastal relief (uneven and loose soil, muddy coast, sandbank);
small size.
Even in the case of a fishing trip in your own car, the chair should be compact, because the trunk is not a dimensionless space;
light weight.
Moving to the place of fishermen on foot, a person seeks to lighten his burden, so the chair should be light enough;
uncomplicated manufacturing technology.
You can make a fishing chair yourself only if you have an understandable and simple technology, so that the product is of high quality and does not take too much time to manufacture.

Homemade fishing chair designs

Homemade hiking chairs have different designs, but require lasting connection of parts and application of simple mechanism folding.

The following types are distinguished by the type of product mobile chairs:

chairs-stools. Folding stools are considered the most convenient for carrying because of their lightness and compactness;
chairs with backs. Folding versions of models with backs significantly relieve the back and make fishing a very comfortable activity;
camping chairs. If you can drive up to the fishing spot by car, it is better to use chairs with comfortable armrests and a reclining backrest. This will allow the angler to avoid back pain and excessive muscle tension.

You will also find here a description of how to make a chair out of wood, with a drawing and dimensions.

What materials can you make a chair

DIY fishing chairs can be made using different materials, including those remaining after repair or other crafts:

wooden bars can form the basis of the entire structure;
wooden reiki used as elements for the seat and back;
aluminum tubes and profiles will serve as supporting parts;
trimming skin or tarpaulins used to cut out the seat;
pieces plastic can also become a durable and at the same time lightweight chair seat;
fasteners are selected depending on the design features (the seat and backrest can be attached to the base on leather or fabric strips or using self-tapping screws, the base parts are fastened screws, bolts or brackets).

For example two products selected - high chair with the traditional four support bases and the original three-legged trekking stool.

Foldable fishing chair with four legs

Simple and very comfortable we make a fisherman's chair from plastic tubes and a little cropping tarpaulin.

We cut eight parts from the pipe: four are more authentic (by 50-60 cm) under vertical supports, four more (by 35-40 cm) - under the formation of the seat and safety lower jumpers for the stability of the product.

We cut out two parts from the tarpaulin: a wide one double seat strip and narrow double strip for bottom jumpers.

Let's get down to assembly:

bolted in the middle two long plastic parts;
couples crossed long pipe sections are connected at the ends with short ones and we get sliding construction;
we sew short sections of plastic pipes folded in half tarpaulin stripe forming seat;
the lower parts of the chair legs are sheathed with a narrow strip of tarpaulin, which will act as limiter;
adjustable tension bolts to ensure easy folding of the chair.

And how to make a hammock with your own hands, you will learn from this article.

Fisherman's chair on three legs

The original three-legged stool chair it is easy to make from the following blanks:

three bar round for legs (length approx. 60 cm);
thick triangle skin either dense fabrics;
fixing bolts(one loop, the other long);
three fixing washers and three finishing, as well as two nuts.

Preparation of parts and assembly we carry out the stool in a few stages:

we measure at the bars 25 cm and we drill, we also do holes on the upper cuts under fastening for the seat;

on leather parts punch holes in the corners, and tarpaulin trim the seat around the corners metal blocks;

fasten two legs with a long bolt, putting a second bolt between them, with a loop;

we fasten the third leg intermediate bolt, adjusting the tension so that the tripod can be fold easily;

fasten prepared seat piece for top the ends of the legs;

attach to the chair a long strip leather so that you can wear the folded product on the shoulder or attach to backpack.

Having mastered the manufacture folding fishing chair, you can proceed with a more complex model - make stepladder chair or a comfortable chair with a back.

For information on how to make a chair for a PVC boat with your own hands, see video:

How to choose a folding fishing chair

A fisherman's chair is a must. With some methods of fishing, you cannot do without it. You can buy it in a store or do it yourself.

Chair selection

It is not difficult to choose a quality model in a fishing store. The seller will tell you about all the advantages and disadvantages of a particular model.

There are two types of chairs:

Folding models are divided into:

Requirements:

Legs. There are three types of legs:
- with wide stops;
- with crossed legs;
- tube legs.

Professional models are equipped with legs with wide stops. The main advantage is the leg height adjustment. The crossed legs provide adequate comfort. Tube legs are the cheapest and most uncomfortable. The main disadvantage of such legs is that they dig into the ground.

Strength and weight. It is important to find a balance between these indicators. Pay attention to the models made of aluminum. This material is lightweight and durable.

Armrests. These structural elements can constrain movement.

When choosing a product, you need to pay attention to the manufacturer, the warranty period, appearance packaging. It is recommended to purchase products made of metal pipes.

Popular folding chair models

Various folding fishing chairs are available to buyers today. Let's consider the most popular models:

Nautilus Simple NC 9002. Compact and lightweight chair that is perfect for both fishing enthusiasts and those who relax in nature.

Advantages:

perfectly stretched seat;
does not sag anywhere;
holds the body perfectly;
soft filler is evenly distributed over the entire area;
wide backrest perfectly supports your back.

The only drawback is that only one position is available. You cannot change the angle of inclination.

Characteristics:

The upholstery is made of durable and wear resistant material.
Another advantage is easy cleaning, which is important for the furniture that is used in nature.
Frame- good old steel (strong and very reliable).
The build quality is excellent. Feels like a glove, nothing staggers anywhere.
Powder painting.
The legs are height adjustable. Therefore, the product can be installed on uneven surfaces. The legs are made of aluminum to avoid corrosion.

When folded, it takes up very little space in the car. And the relatively low weight of 4.2 kg will make it easy to carry it around the reservoir.

The price is 4300 rubles.

FK-5 Carp Cuzo. The structure is foldable. It is very convenient to carry and transport to the place of rest or fishing. Together with this, the weight is about 8.5 kg. When carried, the weight is not felt strongly.

Peculiarities:

Structurally has a reinforced metal base. Maximum permissible load up to 150 kg.
The product unfolds and installs very quickly, which will also be an undoubted advantage during its operation. Surface speed is achieved by the reclining legs. There is no possibility of fixing the legs on the product itself, but this is not essential.

Specifications:

width 55 cm, depth 55 cm.

These parameters allow you to sit very comfortably. The armrests are made of metal but covered in neoprene. The armrests are angled to add comfort to the arms.

FK-5 Carp Cuzo has an important function - the ability to change the backrest tilt at almost any angle. This is achieved by fixing the side screws.

The textile component is very high quality. The material is well stitched and tough, yet resistant to wear and tear. Inside the material there is a soft filling with thermal insulation, which contributes to the comfortable operation of the product.

The price is 1900 rubles.

Nautilus High Back NC 9004.

The first thing you pay attention to is the size of the seat. It is much broader and deeper. Nautilus High Back NC 9004 has high back... One has only to sit down, and you will immediately feel how soft and comfortable the chair is.

Peculiarities:

This model has armrests. If you spend a lot of time sitting on carp or feeder fishing, then armchairs with armrests are more preferable. Because they will relieve the shoulders and back.
Frame. Sturdy, powder-coated steel frame.
Build at height.
The legs are telescopic. Made of aluminum.
The backrest is adjustable in tilt angle. This is done using clamping clips.

The price is 7100 rubles.

Camping SV 600. This is a great chair with a fairly padded seat, a fold-out back and a sturdy frame that can support up to 120kg. Let's consider it in more detail.

It takes very little time to unpack or assemble the Camping SV 600. And this is important if the weather is rainy and there is no time for packing at all.

Characteristics:

The frame is very durable. It is made of tubes with a diameter of 16 mm.
Seat material polyester 600 D. It is a durable and durable fabric. She breathes, so she does not float in the heat. Another advantage of polyester is that it retains its rich color for a long time. Therefore, the cute colors of the SV 600 Camping will remain as bright over time.
The chair has an additional soft fabric cover. In addition, the back is made noticeably soft.
The model has a pocket for a cup and other little things.
There are restraints on the legs. They will not let the chair sink into the ground.
A pocket is provided for a cover in the back. Thanks to him, the back is even softer, and the cover is always at hand.

Camping SV 600 is strong and stable. It has a lot of advantages that you will appreciate.

The price is 2800 rubles.

Nautilus Travel NC 9006.

This form is very popular with manufacturers.

Peculiarities:

Nautilus Travel NC 9006 has a soft padding which takes the comfort level to a completely different level.
Responsible elements are additionally reinforced with the help of the deputy leather and special steel rivets.
The frame is made of durable steel.
The armrests are soft. In one of them there is a thermally insulated cup holder, which will keep the temperature of your drink much longer.
One of the main advantages of this model is its compact folded size. This is the best solution for a family or a company that goes fishing. Nautilus Travel NC 9006 does not take up much space in the car and has the proper level of comfort.
The set comes with a cover.
The price is one of the best in the manufacturer's lineup.

The price is 7400 rubles.

Camping FC-95200S.

This is a classic folding chair with a rigid structure. The model is very popular:

Very easy to unfold.
Weighs a little over 3 kg.
The frame is completely made of aluminum tubes with a diameter of 25 mm. The frame is designed for a weight of 100 kg. The advantages of the aluminum frame are that it is absolutely not affected by temperature drops, moisture, or even a long service life. Therefore, such products serve for decades.
The legs are additionally connected by arcs. They will not allow you to sink into wet soil or sand. Camping FC-95200S can sink a maximum of a couple of centimeters, which will make it even more stable.
Bright Fabric Camping FC-95200S - Lightweight and durable polyester. It is easy to clean and retains the brightness of colors even with very active use.
Another advantage of the model is its bright stand. On it you can place not only drinks or food, but also fishing tackle.

Camping FC-95200S is a reliable friend of fishermen.

The price is 2100 rubles.

How to increase your fish catch?

For 7 years of active fishing enthusiasm, I have found dozens of ways to improve the bite. Here are the most effective ones:

Bite activator... This pheromone supplement attracts fish most strongly in cold and warm water. Discussion of the "Hungry Fish" bite activator.
Enhancement the sensitivity of the tackle. Read the appropriate manuals for your specific tackle type.
Bait based pheromones.

Do it yourself

Not everyone can afford to buy a retractable fishing chair in the store. Many fishermen want to do it themselves. Let's consider two ways:

The first way

A chair with three legs is less stable. However, less materials are required to make it:

three wood screws;
one bolt with a pivot hinge (with washer and nut);
3 pins made of wood (each is 60 cm long, 4 cm in diameter);
seat fabric (leather);
one standard bolt (with washer and nut);
three separate washers.

Instruments:

drill or screwdriver;
two drills (one for 6 mm, the second for 1 mm.).

Instructions:

The first step is to prepare the wood legs. To do this, you need to measure 25 cm from the edge. Next, you need to make it into each hole.
Now you need to drill from the top end each leg has 1 more hole (exactly in the middle).
Moving on to making the seat. It is necessary to cut a triangle out of genuine leather. The length of each side is 26–27 cm.
The details are done! Now we need to start assembling. Insert a bolt into the through hole and put a bolt with a pivot loop on it. After that, you need to insert the second leg into the hole.
A third leg must be put on the bolt with the pivot hinge. Tighten the nut. All excess needs to be cut off with a hacksaw.
Next, you need to connect seat and legs.
Washers must be put on the screws. and screw into the hole.

Second way

The second way (a chair with four supports). Materials:

two chipboard boards 16 mm thick, dimensions: No. 1 30 by 23 cm and No. 2 33 by 23 cm;
four furniture hinges;
self-tapping screw 16 mm.

Instruments:

jigsaw;
pencil or marker;
making a chair.

Instructions:

First you need to mark the chipboard # 2. The first mark - from the top you need to retreat 3 and from the edge 2 cm.The lowest mark should be placed at 29 cm.And the left extreme mark is 12 by 1 cm.
Now we connect the labels with lines. The lowest mark extends 4 cm on each side.
Round off the corners.
Now you need to cut the chipboard along the marked line with a jigsaw.
After we sawed a piece of chipboard # 2 we got one more piece. He will be # 3.
Now you need to glue the edge.
Fold the sawn parts with the back side. We apply chipboard No. 1 to it and draw a line with a marker.
There are slots in the hinges. We combine the slots with the line that we drew. We fasten with self-tapping screws. After screwing two loops to chipboard # 2, fasten two more to # 3.
Exactly put chipboard No. 3 and 1, fasten them together.
It remains to screw the last part.

Very easy to transport. It fits easily into a backpack.

Every fisherman will agree that no matter how fun fishing is, staying in one position for a long time causes significant discomfort. Naturally, you can sit on a tree stump or on the ground, but in this position your knees quickly become numb. To be able to relax while fishing, you can make your own fishing seat.

How to make a fishing chair with your own hands

A comfortable chair for fishing is a “workplace” in its own way. Accordingly, it must be as convenient as possible.

Basic requirements for these seats:

small size;
ease of construction;
height adjustment;
stability on various surfaces.

That is, the main condition is comfort and safety during operation. It often takes a long time to catch a trophy fish. Naturally, it is much more convenient to do this on a chair. If the backrest is adjustable, it will make it possible to find a comfortable position and take the load off the spine. If you go to fishing walking, the chair must be lightweight, and equipped with a strap for transportation.

Materials and tools needed

The most commonly used materials are:

Steel. The main advantage is durability and long service life.
It is undesirable to choose aluminum, since this material is not resistant to mechanical damage. A folding seat made of plastic will also not be able to serve for a long time.
Fiberboard and wood. Wood is considered the best option.

Attention! To fasten the elements of the chair, nails and screws will be needed, and to give softness to the seat - leather or other material for finishing.

Varieties of construction

Today there are many models of chair designs, but the most popular varieties are:

Drawings and measurements

Problems in creating circuits should not appear. If something does not work out, then do not make a real drawing, but simply draw all the elements by hand. Drawing up a diagram includes a drawing of a chair in various projections.

To make the drawing understandable, you need to mark the real dimensions of all elements on it. Then, when all measurements have been made and the materials have been prepared, you can start assembling the fishing chair yourself.

Fishing chair yourself: step by step

The simplest structure can be made as follows:

Select the required dimensions.
Draw a drawing.
Take 2 closed square steel contours.
Fasten them crosswise with a screw.
Sew on top of the seat from a wide strip of dense material.
At the bottom, set a limiter in the form of a thin strip of leather.
Attach an additional one to one arc, it will be required as a backrest.

Attention! it the simplest way making a folding chair. But it must be borne in mind that the back in this case, when disassembled, will be in one position.

Naturally, any angler has a lot of things to take while fishing. Therefore, suspended equipment is sometimes used. This is quite convenient, since everything that is needed is always nearby. You don't have to bend down to the ground behind the hooks and bait, as they are on the rack. A fishing rod or a zakidushka is also often attached to the body kit in the required position.

For a 3-legged fishing chair, you will need the following blanks:

a triangle made of thick leather or other thick material;
3 legs for legs (about 65 cm);
3 washers and 3 nuts;
mounting bolts.

Preparation necessary elements and the manufacture of the seat is carried out in stages:

Making your own fishing chair is very simple. Having picked up a certain model, you can start creating a drawing. Taking it into account, the required materials are calculated. And then all the parts are assembled into a single structure.

The choice of seat design and materials will depend on various parameters. The main thing is ease of manufacture, ease of use, overall dimensions and total weight chair. This combination depends on the individual. If you go fishing by car, then comfort is a priority, while the lightness of the product can be neglected. If you most often have to go fishing on foot, then it is better to choose light models.

Fans of fishing have to take a static pose for a long time, waiting for a bite, so the main condition is to choose the right chair for them.

The models exhibited in shops of tourist or fishing equipment are not distinguished by a variety and special convenience, and they cost a lot.

The quality and structure of the fishing chair

In order for a self-made fishing chair to be really comfortable, it is necessary to take into account what qualities and design of the product will be optimal. :

strength.
The chair must support the weight (sometimes considerable) of its owner in order to last long enough, and not become a disposable item;
stability.
The design of the product should provide comfort to the fisherman in any features of the coastal relief (uneven and loose soil, muddy coast, sandbank);
small size.
Even in the case of a fishing trip in your own car, the chair should be compact, because the trunk is not a dimensionless space;
light weight.
Moving to the place of fishermen on foot, a person seeks to lighten his burden, so the chair should be light enough;
uncomplicated manufacturing technology.
Making a fisherman yourself is only possible under the condition of an understandable and simple technology, so that the product turns out to be of high quality and does not take too much time to manufacture.

Homemade fishing chair designs

Homemade hiking chairs have different designs, but require lasting connection of parts and application of simple mechanism folding.

The following types are distinguished by the type of product mobile chairs:

chairs-stools. Folding stools are considered the most convenient for carrying because of their lightness and compactness;
chairs with backs. Folding versions of models with backs significantly relieve the back and make fishing a very comfortable activity;
camping chairs. If you can drive up to the fishing spot by car, it is better to use chairs with comfortable armrests and a reclining backrest. This will allow the angler to avoid back pain and excessive muscle tension.

Drawing of a folding fishing stool

What materials can you make a chair

DIY fishing chairs can be made using different materials, including those remaining after repair or other crafts:

wooden bars can form the basis of the entire structure;
wooden reiki used as elements for the seat and back;
aluminum tubes and profiles will serve as supporting parts;
trimming skin or used to carve out a seat;
pieces plastic can also become a durable and at the same time lightweight chair seat;
fasteners are selected depending on the design features (the seat and backrest can be attached to the base on leather or fabric strips or using self-tapping screws, the base parts are fastened screws, bolts or brackets).

For example two products selected - high chair with the traditional four support bases and the original three-legged trekking stool.

Foldable fishing chair with four legs

Simple and very comfortable we make a fisherman's chair from plastic tubes and a little cropping

We cut out two parts from the tarpaulin: a wide one double seat strip and narrow double strip for bottom jumpers.

Let's get down to assembly:

bolted in the middle two long plastic parts;
couples crossed long pipe sections are connected at the ends with short ones and we get sliding construction;
we sew short sections of plastic pipes folded in half tarpaulin stripe forming seat;
the lower parts of the chair legs are sheathed with a narrow strip of tarpaulin, which will act as limiter;
adjustable tension bolts to ensure easy folding of the chair.

Fisherman's chair on three legs

The original three-legged stool chair it is easy to make from the following blanks:

three bar round for legs (length approx. 60 cm);
thick triangle skin either dense fabrics;
fixing bolts(one loop, the other long);
three fixing washers and three finishing, as well as two nuts.

Preparation of parts and assembly we carry out the stool in a few stages:

1. we measure at the bars 25 cm and we drill, we also do holes on the upper cuts under fastening for the seat;

Advice: if there are no round bars at hand for making stool legs, cuttings from a shovel or other gardening tool are perfect instead.

1. on leather parts punch holes in the corners, and tarpaulin trim the seat around the corners metal blocks;

1. fasten two legs with a long bolt, putting a second bolt between them, with a loop;

1. we fasten the third leg intermediate bolt, adjusting the tension so that the tripod can be fold easily;