Who doesn't dream of catching big carp? But the attachments for it on sale today are far from cheap. In fact, you can assemble a carp kit with your own hands, which will work to look no worse than purchased tackle. Carp - bottom fish and to know some features of behavior, bite places, and to show some perseverance and patience is nevertheless necessary.

Tool Mounting: A Step-by-Step Process

Many different rigs can be made with your own hands: a helicopter, a clip, inline, sliding, Gardner's paternoster, which do not require special devices and are made right on the fishing spot.

Great for carp fishing and signals a bite with an inline rig. To make such equipment, you need to select:

• fishing line 1 meter long;
• in the form of a cage with a clasp in the form of a weight;

It is a simple and effective design. For installation:

• bend the line in half;
• make a knot at a distance of 0.5 m from the edge;
• attach the sinker to the feeder;
• attach a piece of fishing line for a leash in a length of 20-25m;

The feeder can be attached in several ways. This is great option rigs for a muddy bottom with a bite transfer to the tip of the rod. will not leave the feeder under the water, which will ensure excellent operation of the tackle when fishing.

Hair rig

Without putting the bait on the hook. The rig includes hair, a strong hook, soft large diameter fishing line. When making a rig, the bait is fixed at a distance of 20 cm from the end of the line. Several turns with the hair are made with the possibility of lengthening at any time.

Helicopter

It does not have a rigid connection between the lead and the leader. Good for long casts... Depending on the application, the distance between the leash and the load can be changed.

For installation:

• tie a piece of fishing line;
• connect the leadcore with a sinker;
• lead into the ring;
• place two stoppers between the load and the lead core;
• make a ring and connect it with a leash;
• tie the leash to the ring, then to the leadcore;

Clip

The favorite among tackle for carp, a safe rig with a dead weight attached.

For installation, you must have a sinker, a swivel, a tube for equipment, conical, coupling, clip, tube 20 cm long:

• put a clip on the fishing line;
• thread the line through the cone sleeve;
• attach;
• attach to a leash;

Suitable for fishing carp in a weak current in lakes and reservoirs for long casts. But the leashes are often confused, and the sensitivity of the structure can be significantly reduced.

Sliding rig

With free movement along the line. It is quite sensitive and will not lead to a tilt of the tackle under the weight of the weight and it will not be difficult to make a cut in time.

To mount the sliding equipment, you need to choose a latch, a sinker, a silicone tube, a buffer sleeve, a swivel with a ring:

• put the pipe on the line;
• connect the leadcore with a swivel;
• pull through the ring and buffer sleeve;
• attach the swivel to the latch and then to the silicone tube;
• mount a weight;
• lastly, connect the hooks to the leash;

Carp killer

Reliable equipment, for installation you will need: hooks (3pcs) No. 6, rubber stopper, weight, swivel and fishing line:

• put a sinker and a swivel on the line with a latch;
• lead the line through all the springs;
• fix;
• tie a weight with a leash;
• mount the swivel and latch. This completes the rig;

Does not require additional devices during installation. Can be crafted right at the fishing spot. The rig will remain above the water surface at all times, regardless of whether the trough is full or empty.

DIY tackle making

Let's consider how to make Inline tackle for safe fishing even in the event of a line break and when the feeder is freed from the rig. For manufacturing, you need to purchase a feeder feeder, strong fishing line with a trimmer, a swivel, hooks.

For installation:

1. Tie a swivel to the line and secure with a rubber corkscrew so that the mount is deaf.
2. Lead the line into the cavity of the feeder.
3. Measure out 30cm, make a loop.
4. Tie to main line.
5. It is better to prepare a leash from a special material.
6. You need to tie the fishing line by hand so that it will withstand in case of carp leaving the thickets and driftwood.
7. The hook size should be # 10.

The feeder and hooks are selected as for when placing the bait.

R Types of tackle for carp fishing

It is not easy to catch carp. Often there are trophies up to 8-10 kg, and an ordinary fishing rod can quickly break. When you make it yourself, the main thing is the strength of the rod and the average diameter.

Views:

1. Will do quite well, you can also make it yourself.
2. Float rod, as a popular tackle among anglers from flexible walnut rods and strong fishing line. Applicable, match, plug-in fishing rod. The main thing is to choose a fishing line of medium thickness and thick wire hooks.
3. Variety of donuts in the form of various feeders, which can also be prepared by hand. When catching carp, you cannot do without undercutting, so you need to play with the feeders and only in this way carry out the wiring. The best rod is a feeder rod with a rod with an elongation of 0.30mm. When fishing on small individuals, homemade feeders and springs are suitable. There can be many options for self-production.

Equipment selection criteria

The flat bottom is favorable for carp fishing

On a flat bottom, you can use a hair-like, slip-on rig.

The presence of snags

Carps love to hide under rocks, among reeds and vegetation. This is problematic for anglers, as the rig can be quickly and irrevocably lost. But it is in hard-to-reach places that large fish are found and are rarely found in open spaces. These are lovers of water shelters and only feel safe there.

In such places, it is better to use a rod (rather) powerful in length up to 5 m, and the straighter the rod, the easier it is to control the bites.

Before starting fishing, it is necessary to build a stand for the stability of the fishing rod on the ground, and also mount:

• electronic signaling device with sufficient sensitivity, such as Pacific Rim;
• mono-line is suitable up to 0.35mm in diameter;
• anti-twist from a tube in the presence of shells and a rocky bottom;
• safe clips for releasing the load when fish bite in conditions with a difficult embossed bottom;
• the streams are quite heavy for the possibility of a quick exit of the tackle from the water and not getting stuck in the reeds and algae;

Il

Preferable for carp but difficult for fishermen. It is in waters with a muddy bottom that carps are actively found.

If there is such a bottom, the leash in the pond should be 20 cm long with a marker sinker at one end.

It is better to use a marker rod, which avoids a lot of problems, also a float with the ability to stick.

The weight of the feeder should be approximately equal to the marker sinker so that it does not wobble when lowering to a depth.

A compact helicopter tackle for a muddy bottom, which is not capable of resisting when in contact with a sinker, is suitable. Feeders should be wide and light enough due to silt at the bottom.

Basic elements for carp fishing

1. Rod length up to 3-4m as the main element of carp fishing equipment. A completely fiberglass spinning rod of Chinese production is suitable, which can be bought for 400 rubles. in a fishing shop. Fiberglass is not inferior to expensive carbon, suitable for catching large carp with dough bait up to 250 g.
2. The reel is innovative, excellent for fishing carp, as quite powerful and reliable, not inferior in performance to inertialess models. But not suitable for beginners. The best option is to buy a spinning feeder model from the company: salmo, okuma, cormopan.
3. The leash can be invisible or neutral. It is better to choose a short leash for good bite vision due to the flat body of the carp. So that the weight is clearly visible to the carp and occupies a central position in the water in relation to the feeder. In the presence of a short leash, the throwing distance of the equipment being thrown will increase significantly.
4. Regular and monofilament line is preferred. Some anglers apply, quite sensitive. The diameter of the fishing line for carp is 0.4-0.5mm. The best option is a specially purchased carp line from the store with a fairly high coefficient of stretch. When playing large individuals, it will serve as an excellent shock absorber.
5. The main thing to select the sinker is taking into account the terrain conditions and the weight of the bait to keep the rig at the bottom regardless of the composition of the complementary food. She easily made the serifs herself and quickly notified the fisherman about the beginning of the bites.
6. The hooks should be bent inward or bent back with a sting. The first option is best, as reliable and sharp hooks, quickly swallowed by the fish, which gives more chances of hooking.

Technique and tactics of catching carp

When fishing, it is necessary to observe some features, take into account the subtleties to obtain the desired result.

Carp is unpretentious to the habitat, but rather shy and rarely comes across with the awkwardness of the fisherman.

The main thing is to feed fish place, but not a very satisfying bait, because when the carp is full, the biting will immediately stop:

1. Complementary foods must be thrown in the same place, no more than 200 g every 1 hour, with the addition, but without a pungent smell, otherwise the fish can be quickly frightened.
2. Carp is shy, therefore, when fishing, you need to keep quiet and it is advisable to move away from the place of fishing. Also, choose clothes that are darker in color with the shore and surrounding vegetation.
3. As a fishing technique, you need to pay attention to the rod. A tapered rod is suitable, capable of compensating for the powerful jerks of carp or. From bait:, boiled potatoes, bread,.
4. The bait clings to a hook or hair. So usually carp bites are confident. Although, when the bait is swallowed, the fish sucks it for a long time, tasting it, and only then takes it completely. This is manifested by light bites on the water, which also needs to be taken into account by fishermen.
5. It is advisable to mount an electronic signaling device to the tackle, which will indicate the approach of the fish.
6. The tackle should sink to the bottom evenly and completely. Fishing requires careful and gradual wiring to avoid line breakage when large fish are flooded.
7. After the carp appears above the water, you need to use a landing net or a hook.

Carp: description and features of behavior

Carp is a kind of river specimen with characteristic habits. This is night fish and prefers to eat exclusively at night, while during the day he prefers to stay in the pits, go out to feed in the evening or early in the morning.

Carp is a schooling fish and is rarely found alone. Only large individuals with strong winds and swaying reeds sometimes fight off their flock, swim for the sake of curiosity to find food for themselves.

The fish is cunning and agile, quite picky in complementary foods and should be selected by fishermen taking into account the time of year.

In spring and autumn, simple plant foods are preferable, in autumn - of animal origin. Fit self-production pearl barley porridge, steamed, dough. In autumn, carp feeds more on worms, maggots, larvae, biting activators, i.e. any soft bait.

Habitat

Carp prefers to hatch in wide and deep places of water bodies with a weak current without a hard rocky bottom. The fish likes warm places and not too deep waters.

Often, it is found in shallow water, with strong warming of the water, it prefers to go deep into the reservoir, old channels, flooded quarries or small rivers. It hides under bridges with aquatic vegetation and many reeds.

Carp hibernate in deep pits. It wakes up in about March after the lilac blooms, begins to spawn in places convenient for itself, but tends to migrate long distances. Closer to winter, it strays into shoals of 1000 heads.

Chooses secret bays in rivers for wintering. But it happens in sunny clear weather, even in late autumn, jumps out of the water in order to feed early or late in the evening in cloudy weather. He considers river reeds and floating islands to be an ideal shelter.

Bite calendar

1. Winter- not a good time to catch carp. At this time, he is lazy, prefers to spend a little of the stocks accumulated over the summer.
2. Spring When the accumulated reserves run out, the carp begins to go out in search of food. A quite successful time for fishing is the end of April, when the carp are active and bite well. In mid-May, it begins to spawn and the biting stops.
3. Summer when the carp is quite active and constantly looking for food in comfortable conditions exclusively in warm water. In August, with the arrival of cold weather, a strong fever begins and good hot days are best time for biting. Until the onset of cold weather, you can have fun with good catches until about mid-October.
4. Autumn, with the onset of cold weather, the activity of fish stops, but before the first night frosts it is quite possible to fish up to the covering of rivers with ice. Bites are active until lunchtime, although most of the time the carp prefers to stay in wintering pits.

The main feature when mounting tackle on carp is the free movement of the feeder along the line.

Experienced anglers advise:

1. When installing the tackle, use strong fishing line and fasten the leashes well so that there are no breaks.
2. Use quality fishing rods that will not break when fishing.
3. To increase the strength of the line, use plastic for the material.
4. Do not raise the fishing rod too much above the water, otherwise all the fish can be quickly frightened.
5. If there are no bites, then you should not immediately replace all the equipment, you can only replace a part.
6. The tooling must be reliable and you cannot save on material. Some items can be purchased from specialized stores.
7. To achieve efficiency, you should prepare for fishing, analyze the depth of the reservoir, as well as the bottom;
8. In advance, a few days in advance, feed the fishing spot.

The main thing is that this or that installation of the equipment fully complies with all the features and conditions for catching carp.

Every angler dreams of a catchy tackle that would consistently bring him a lot of trophy fish bites. In this regard, a lot of devices were invented, each of which is good in certain conditions. The most versatile of them can be called the tackle of the crucian carp, which, in fact, can attract other fish. It is also called "killer", and instead of "crucian carp" they say "carp", but all this is tackle of the same type, working on a similar principle.

The name of the death of a crucian carp was given for the high efficiency of this device. She clings to the feeder rod, but the blank test should be significant. The fact is that the carp killer consists of several spring-type feeders, which, when filled with bait in combination with a sinker, will give a very significant weight, from which a weak rod will break when casting.

One hook on a leash is tied to each feeder, therefore, the chances of a bite increase in comparison with conventional feeder tackle, because a large area of ​​the bottom is covered. In this situation, the school of fish does not squeeze over one feeder, but stretches evenly and each individual has the opportunity to grab the bait. The crucian carp killer is a profitable tackle, especially when the angler has several abandoned feeders, since self-chopping is possible on it. If it is not possible to jerk the rod when the alarm is triggered, then it is likely that this will not be needed.

Photo 1. The most popular version of the "killer".

The assembled rig of the killer crucian carp looks like a train with carriages, because its feeders follow each other. At the very end, a drop-shaped weight is installed. It performs several important tasks:

• increases weight for casting distance;
• promotes self-notching at a time when the feeder is empty and its weight is not enough;
• prevents gear from tangling in flight.

This tackle may well be mounted on an ordinary fly rod or Bolognese type. Naturally, casting is carried out near the shore or from a boat without a swing, since the form is not designed for this and may break.

DIY tackle making

The process of making tackle for a crucian carp does not require special skills or the ability to knit complex knots. On the contrary, the fewer connected sections there are, the more reliable the installation will be. You can make a crucian carp killer in 10-20 minutes, especially if all the components are available. For this you will need:

• 2-3 spring feeders;
• hooks No. 8-6;
• line 0.4-0.5 mm;
• rubber stoppers;
• leash material;
• cargo;
• swivel and carabiner.

Length fishing tackle the killer of the crucian carp is different, but rarely exceeds 50-60 cm. For its manufacture, a 1 m long fishing line is first cut off. A lead weight is tied to one end of it, the weight of which is selected depending on the test of the rod. Then the stopper is threaded through. It moves across the entire line and is installed approximately 10-15 cm from the load.

Fishing for tackle for killer carp or crucian carp involves the use of spring-type feeders with a tube in the center. When the first stopper is dressed and installed, the feeder is put on after it. As soon as it rests against the stopper, it should be fixed on the other side with an additional elastic band. After stepping back about 10-15 cm, a third stopper is placed. The second feeder rests against it, which should also be tightened. As a result, it will turn out to put on three springs, fixed by six stoppers.

At the remaining free end of the line, a swivel with a carbine is knitted. This is done using a conventional loop, made for reliability two times. In order for the knot to tighten well, it should be moistened. The carp killer already has an almost finished look and all that remains is to tie the hooks. To do this, cut off three pieces of leash material about 20 cm long. A hook is knitted to each of them with a standard bayonet knot.

At the second end of the obtained blanks, a loop should be tied at a distance of 7 cm from the hook. The leashes are attached to the tube of the feeder by a stranglehold method. As you can see, making a tackle for a crucian carp can be very easy and quick, while the installation is reliable.

Advice! If you have a rod with a low test, you can abandon the sinker and put the first feeder bigger size... In this case, when casting, it will fly in front and the tackle will not get confused.

Homemade spring for tackle

Many anglers prefer to make a variety of attachments on their own. It will be interesting for them to consider the question of how to make a simple spring for a crucian carp killer. This type of feeder is the easiest to manufacture and the least expensive in terms of materials. For work you will need:

• flexible wire;
• unnecessary transparent ballpoint pen body;
• knitting needle or rod of the same diameter.
• pliers;
• nippers.

First you need to prepare the body of the ballpoint pen. It should be round in the shape of a tube. The back cap is twisted and the thin threaded spot is cut off. Along the handle, from the cut end, a cut is made with a depth of about 5 mm. Its width depends on the diameter of the wire.

Wire is wound around the needle. The coils are superimposed on each other to form a tube 5 cm long. After that, the needle is removed. The resulting tube is inserted inside a ballpoint pen. The long end of the wire enters the sawn socket, and the turns begin already along the surface of the handle. They are done with some step so that you can push the bait into them. As soon as they have reached the edge of the inner tube, the winding stops. The handle is pulled out and a finished spring is obtained. Both ends are biting.

Advice! If instead of a handle, you use a tube of a larger diameter, you will be able to make a large feeder for tackle, a killer crucian carp with your own hands, which will attract more big fish.

Photo 2. The tackle is so popular that it is produced by some companies.

Preparation of groundbait

Tackling a crucian carp with your own hands is not all that you can make yourself. You can give preference not only to purchased plasticine, but also to make groundbait for filling in feeders. Cooking will take some time, since the crucian carp killer requires a viscous filler in the spring, especially if it is small. Various recipes are used, each fisherman has a favorite. One of them is especially popular, as evidenced by the fishing experience of many professionals. It consists in the preparation of pea mastic. For this you will need:

• pea flour 1 tbsp.;
• water 2 tbsp.;
• sunflower oil 1 tablespoon;

This bait is very good when catching a crucian carp with a killer, so it will be fully justified to devote half an hour to its preparation. For this, pea flour, semolina and water are mixed in a small saucepan. Then it is placed in a large pot of water over the fire. The result is a water bath. The mixture is brewed for 20-25 minutes after boiling. The water boils out of the porridge, and it becomes thick. After that, when the mixture cools down a little, it must be taken out of the pan and crumpled like plasticine. Having prepared it well, oil is taken and intervenes in the mastic.

Fishing process

Fishing for crucian carp with this tackle is practically no different from the standard feeder, so absolutely everyone who used donks knows how to fish. For this, the bait is stuffed into the feeder. Various types of bait are used, including worms, maggots, bloodworms,

Photo 3. The equipped rig is ready for battle.

For the best effect on the tackle, you can put on several types of bait. Carp assemblies with large feeders can be used not only with a trowel, but also with other types of baits. Fishing is very lively if you use additional bite activators or drops with flavors. You can catch not only crucian carp or carp, but also bream, roach, carp and other fish.

Fishing for this tackle is not as sluggish as for conventional feeder troughs. Bites happen more often, and if they are absent for 10 minutes, you can do a reset. It will be possible to use any part of the reservoir as a fishing point, but if there is a hunt for a trophy, then it should be thrown into pits, curbs and pits. Knowing how to make a tackle, it will be possible to prepare several replacement kits in case of a break, which will allow you not to be as upset as in case of loss of purchased feeders.

The crucian carp killer tackle is a modernized variation of the conventional feeder tackle with a load-feeder.

There can be many variations of such gear, and many of them have the right to life. Consider the most common ones, and also answer the question of how to make such a tackle yourself.

You can buy killer tackle in some fishing stores, but first study the structure of the rig on this page so as not to buy non-functional tackle.

Design

Deaf tackle

A variant of the killer tackle with three feeders, three hooks and a sinker (blind rigging). Shows good results with good line tension.

Sliding tackle

Option with three hooks and one sliding feeder

All other options are derivatives of the first, second, or both methods.

The peculiarity of the killer tackle is that the rig uses a large number of hooks and often a larger number of feeders than one. Theoretically, you can bring the number of spools to five, and the number of hooks to 8-10, while using different baits, baits and baits.

Use foam balls for some of the hooks. This will prevent some baits from reaching the bottom, which will also allow more fish to spot your rig.

In the video, fishing is carried out on a killer tackle, as it looks can be observed on an unforgotten fishing rod in the foreground - three filled bait load-feeders - this is it.

How to make a tackle-killer crucian carp

It is done in an elementary way. For blind rigging purchase 3 weights-feeders (for one tackle), fix the feeders on a thick fishing line (0.4-0.5) or a braided cord at a distance of 20-30 cm from each other. If the load-feeders do not have a sinker or they are small, you can tie a sinker at the end, or use the last load-feeder a more massive one.

It is highly recommended to use the last heavier feeder, or use the sinker at the end of the tackle. This is done in order for the tackle to fly through the air and sink first of all with the end of the tackle, so as not to get confused.

Then hooks are tied on leashes with a thickness of 0.25-0.3. The size of the hooks depends on the size of the fish you are hunting, but remember, it is better to use smaller hooks than larger ones.

A swivel with a fastener is tied to the beginning of the tackle.

For sliding rigs use lead pellets as stoppers (sliding boundaries of the load-feeder on both sides).

The killer tackle allows you to use a large number of hooks and feed the place abundantly different options bait, which undoubtedly affects the quality and efficiency of fishing.

Shop purchase / analogs and alternatives

You can buy the ideal design of a crucian carp killer tackle in online stores, but it is not always possible to find equipment in fishing city stores. Nevertheless, you can use alternatives or very similar fishing gear:

The nipple for crucian carp is also not very sporty, but very catchy tackle. Also allows you to fish for carp and silver carp. You can buy it in a significantly larger number of stores.

Carp feeder "Method" Is a sports carp rig, which somewhat resembles a pacifier, but differs in a special bait and a sports structure that does not allow harm to the fish.

Carp is rightfully considered one of the most interesting fish in the middle lane for sport fishing. The number of carp fishing competitions only confirms this. However, this trophy is of interest not only to sports anglers. Amateurs also catch it, while sometimes far from sports equipment. The tackle of the carp killer is one of such, since it has many hooks and does not require timely hooking, using the peculiarities of the feeding process of fish of this family.

Using tackle "carp killer" greatly facilitates the process of fishing

Advantages and disadvantages

Fishing for carp and carp with this tackle has its positive aspects:

• The self-hooking effect is used, thanks to which the angler has the opportunity to move away from the tackle. This is especially true in cases where fishing is not the only purpose of going out into the countryside.
• The rig does not require any special rods or reels, anything available will do.
• A large number of hooks increases the likelihood of a bite on one of them. As well as two or three feeders that attract fish to the point of fishing.
• The self-chopping effect is especially relevant in bad weather conditions or at night, when problems may arise with the bite indication.
• The carp killer installation is not only suitable for this fish. It can also catch crucian carp, bream, and a little less often roach, tench and rudd.

This rig is often positioned as a super catchy tackle for carp, however, it is not without its drawbacks:

• The tackle has no sensitivity as such - any changes become visible after the carp has been spotted, which makes this rig uninteresting for lovers of more sporting fishing options.
• Such carp mounts have a common design flaw - due to the large number of leashes with hooks, they often get tangled. Anti-twist tubes only partially correct this drawback.

Tackle has both pros and cons

• The equipment is not sports, which means that in some cases it is forbidden to fish with it. For example, in some parts of water bodies you can fish even during the ban period, but only if the tackle has one hook. Often it can kill in the most literal sense - if the bait is swallowed too deep, there is little chance of surviving the catch.
• Factory-made carp killer tackle often cannot be quickly replaced with a lead. Such a need usually arises when changing the distance and depth of fishing with poor bite at the originally selected point.

Required materials and tools

To make a carp killer rig you will need:

• Line with a diameter of 0.2 to 0.4 mm, depending on the expected size of the catch. For small fish on small ponds, 0.2 is enough, but in the case of trophy carp, and 0.4 may be just right.
• A braided line or a line of a slightly smaller diameter - it will go on leashes. In this case, braid is used more often, since it is softer and less alarming for carp.
• Lead sinker with an eye (this will make it possible to quickly replace it).
• Finished troughs or stainless steel wire and plastic tubes for making them yourself.
• Pliers, round nose pliers, swivels, snap hooks, locking beads, hooks.

Carp and crucian carp are popular fishing targets, so there are many types of tackle to achieve good results... The equipment for the killer of crucian carp and carp has established itself as one of the most effective ones used for non-sport fishing.

What is

In fact, the "killer of crucian carp and carp" is an improved one. Usually consists of three feeder springs, connected by a fishing line 0.3-0.5 mm thick. A hook with a short leash (2-4 cm) is attached to each spring. The number of elements, at your discretion, can be increased.

How does it work

The springs are filled with bait, the bait is put on the hooks and the tackle is thrown into the fishing area. During the dive, the bait begins to wash out with water, attracting fish. In the process of eating the bait, the fish swallows the hook with the bait and, trying to spit it out, self-chokes. It remains to make a control sweep and pull out the prey.

How to make a carp killer tackle

You can make a killer tackle yourself. For this you will need:
3 feeders-springs without weighting (this is a must!);
3 hooks. The size depends on the size of the intended fish, the smaller the better;
Sinker weighing 30-50 g;
Mono line with a diameter of 0.3 mm;
Swivel;

Assembly instruction:

1. The lead attaches to the swivel, so it is best to have it with an eyelet.
2. A spring is tied to the swivel with a fishing line. The distance between them is 8-10 cm. It is better to choose feeders with a tube. In this case, the fishing line is passed through, and rubber stoppers at the edges will limit the movement of the spring along it. In any case, the spring should not move freely along the line.
3. 2 more feeders are attached in the same way. The distance from each other is also 8-10 cm.
4. At the end, a small leash with a loop is knitted in a knot-eight. Instead of a loop at the end of the tackle, you can attach another small swivel. This will make it easy to replace the rig and reduce the chance of entanglement.
5. A hook on a leash about 4 cm long is tied to each feeder. It is better to use flucarbon fishing line - it merges with the bottom and is not visible to the fish.

The manufacture of tackle should be approached responsibly. Due to the abundance of elements, the likelihood of its entanglement increases, so careful selection of the components and adherence to the required distance will reduce the chance of overlap to zero.

The pros and cons of such a tackle

Pros:
The bait is delivered to the fishing area by several feeders, therefore, the number of casts for feeding is significantly reduced. Properly prepared groundbait will not wash out with water during the dive and will reach the very bottom.

1. Provides self-undercutting of fish, increasing the number of effective bites.
2. 3 hooks increase the chance of catching fish compared to one.
3. Thanks to self-cutting of prey, it allows you to successfully fish in bad weather.
4. The killer tackle successfully catches not only carp and crucian carp, but also roach, carp, bream, bleak, rudd. Some anglers report that even a small pike is taken.

Flaws:

1. Low sensitivity. The bite is visible only after the fish is hooked, which reduces the interest in fishing.
2. Design imperfections that can entangle the gear.
3. The tackle is not sporting due to the abundance of feeders and hooks.
4. Prefabricated tooling does not allow quick lead replacement.
5. The killer tackle is more intended for fishing for large fish, the bite of small crucians and carps will go unnoticed.

What to use as bait

The choice of bait depends on the season. Vegetable foods are suitable in summer:

• bread;
• pearl barley;
• peas;
• corn;
• potato;
• semolina;
• dough.

In the spring and autumn, it is better to use animal bait:

• maggot;
• worm;
• bloodworm.

If there are no bites for a long time, then the tackle must be reset. Fishing efficiency will be ensured by a 10-minute interval between casts. Using 3 hooks allows you to experiment with different baits at the same time. For example, on one hook - maggot, on the next - pearl barley, on the last - bread. In the process of fishing, the most catchy bait is determined, which will be rationally used on all hooks.

Fishing technique

The fishing technique for the “killer of crucian carp and carp” is no different from fishing with feeder tackle.

1. The fishing area is visually selected.
2. The depth is determined by dragging along the bottom of the weight. With the help of a marker float, you can determine the nature of the bottom relief.
3. The first cast is done without hooks. For casting accuracy, it is better to orientate yourself horizontally to an object or object on the opposite bank.
4. The rod is placed on a stand, the line, after tension, is clipped on the reel spool.

The above steps will help guide the feeders to a precise location. For all subsequent casts with hooks, the rod must be held vertically without tension until the line reaches the clip and a blow is felt. Immediately after this, the rod is gently lowered forward and placed on the support. This will allow you not to rewind the line after lowering the feeders to the bottom.

Because of heavy weight tackle small bites on it are not visible. Usually - a sharp jerk followed by sagging of the line, which signals that the fish is already on the hook.

Thus, the equipment "crucian and carp killer" makes it possible to catch more fish, but reduces the fun and excitement of fishing. The right approach fishing with such tackle will allow you to catch only large specimens, without being distracted by small fish. For sports fishing enthusiasts, a regular feeder tackle with one feeder and a hook is more suitable.

• The killer tackle can be hooked to spinning and float rods, but the former have proven themselves better.
• It is better to lure the fish by using a different bait for each spring.
• Professional anglers are advised to use foam as bait. He will not let the fish get distracted from the bait, while eating which it will pull in the hook and hook. Additionally, the Styrofoam balls will lift the hooks off the bottom, attracting prey. Styrofoam can be replaced with foam dough sold in specialized stores.
• Mastic, hominy, purchased mix or self-prepared porridge are suitable as bait. The main thing is that it should be well washed out with water. The effectiveness will be increased by adding to the bait mix. The use of flavors and ferromones will help to increase the catch.
• Steamed Hercules flakes should be mixed into the groundbait as a binder.
• You should take hooks No. 6-8. But it is better to focus on the size of the fish - the hook should be easy to swallow.
• Tackle can get tangled with the same weight of springs. Weighting the last feeder with a weight will help to avoid this.
• Ideally, feed the fish the day before fishing.
• Purchased killer rigs can be tweaked to make them more sensitive. For example, if the hooks are not knitted tightly to the spring, but to the swivels, fixed with locking beads a few centimeters above the feeders.

The crucian carp and carp killer rig is very easy to use and therefore perfect for beginners.