For production of PVC inflatable boats Finnish five-layer is applied PVC-reinforced fabric of Scantarp concern and PVC fabric Mirasol ( South Korea) from 700 g / m2 - 1100 g / m2, which has proven its quality in the market of PVC products. When making inflatable pvc boats modern technologies are used that make it possible not only to firmly connect parts PVC products, and also provide flexibility and elasticity of the seam in places of increased stress, which gives high level reliability and safety on the water. Taking into account the comments and preferences of buyers, project developers and technologists presented a wide range of PVC boats with different technical characteristics and types of equipment.
Depending on the design features, PVC inflatable boats there are several types:
Rowing PVC boats without transom- designed for movement on small lakes and rivers. This view boats has many advantages. They are small and lightweight, designed for one or two seats, equipped with one kayak oar or two conventional oars, depending on the model. They have a simple solution - a two-section balloon, seats - an inflatable pillow or a bench. This is a good option for a fisherman or hunter, tourist and traveler, as well as a family vacation in the waters of your region.
PVC transom boats without keel are classified as flat-bottomed, designed for use with an electric motor or gasoline engine not high power up to five hp Unlike the first type boats, this range has a tough transom for attaching the outboard motor. Boats are not completed with rigid and inflatable floor, also no keel... At the request of the buyer, boats of this category can be equipped according to their goals and desires under the order. PVC transom boats convenient for moving around water bodies, trolling fishing, traveling along the river, family outdoor activities.
Transom PVC boats with keel due to its high technical specifications for many years they have firmly held a leading position in the fishing tackle market. This view boats designed for motors with a power of five or more Horse power for movement on small and large bodies of water in the coastal zone of the water area. All model range PVC transom boats with keel is completed hard floor (payol), stringers depending on the model, keel short or elongated. When choosing boats from the category of this model range before buying, decide under what motor power you need pvc transom keelboat.
Vyat Boat Company accepts orders for personal configuration, installs additional equipment and options with gluing various devices for the entire model range PVC boats provided in the catalog on the site.
Russian fishermen have appreciated domestic inflatable boats, and they are in constant demand with them. Several domestic manufacturers compete with each other in the quality, reliability and comfort of the boats.
Yaroslavl and Ufa plants
The factories of CJSC Yaroslavl-Rezinotekhnika and OJSC UZEMIK produce in total about 70 models of boats from PVC.
Of these, the most popular models are:
Ibis 20
A boat with a lifting capacity of 500 kg and dimensions of 3600x1650 mm. The bottom is made of lattice slats. Has two hard seats. The boat is equipped with collapsible duralumin oars and a pump. Three independent air compartments. Recommended motor power - 20 hp. There are eight boats in the model range for motors of 3, 5, 8, 6, 10, 15, 20, 25 hp. Price $ 640.
The boat with an inflatable keel is 310 cm long and has a carrying capacity of 375 kg. On the bottom there is a rigid slate made of laminated marine plywood. Designed for use with a motor with a maximum power of 10 hp. with. The line includes 4 models for 6, 8, 10, 20 hp motors. with. The boat hull is equipped with a fender. The boat is packed in two wardrobe trunks and is completed with two rigid seats, collapsible duralumin oars,. The price of the boat is $ 525.
ML-2
The smallest motor boat made of PVC produced by the Ufa plant of OJSC "UZEMIK" with a length of 250 cm and a carrying capacity of 300 kg. The maximum permissible motor power is 8 hp. with. The assembled boat itself weighs 42 kg. The bottom is made of collapsible rigid slate. Three independent air compartments. Price $ 236.
Karaidel-44
A boat with an inflatable keel with a lifting capacity of 400 kg and a length of 360 cm. It has three independent balloons, except for the keel. The boat is designed for an engine with a capacity of up to 12 liters. with. The boat weighs 75 kg. Price $ 640.
Manufacturer Mnev and K
Legendary inflatable boat with welded seams inflatable keel weighing 46 kg and a length of 3 meters. The bottom is made of hard flooring. Designed for use with engines with a maximum power of up to 8 liters. with. Loading capacity 370 kg. It is made of multi-layer PVC with a density of 850 g / m². It has four independent compartments that form a spacious cockpit. It is completed with paddles, floorboards, pump, two cans, stringers, wardrobe trunks. Additionally, it can be completed with an awning tent. The line includes 7 models with lengths from 2.75 m to 4.0 m. Price $ 565.
A model from a series of heavy boats, of which there are four varieties in the line, with a length from 4.2 m to 5 m with a carrying capacity from 820 kg to 1 ton. Recommended, and it is also the maximum engine power, 35 liters. with. It has four independent balloons and an inflatable keel. The boat is designed for long and comfortable journeys and even transportation heavy loads and horse-drawn animals. Five independent air compartments. Hard flooring bottom. Boat weight 100 kg. The boat can be equipped with a console and a tent. Price $ 1165.
Manufacturer Leader
Small-sized boat made of five-layer PVC with a length of 2.5 m and a carrying capacity of 320 kg. The weight of the boat is only 22 kg, which even a teenager can bear. The boat is designed for use with a motor up to 6 HP. with. The bottom is made of slatted flooring. The set includes: collapsible aluminum oars, two plywood cans, a pump, a repair kit and a backpack for carrying. Price $ 367.
Heavy boat with a lifting capacity of 1100 kg. It has 4 independent compartments and an inflatable keel. Designed to work with a motor with a maximum power of 40 hp. with. Hard flooring bottom. Based on the declared characteristics, it can take on board any small car: Zaporozhets, Oka, Smart. In addition to the standard equipment, it is equipped with two overpressures. Price $ 980.
Manufacturer Solar
Solar 330
The most popular boat size is 330 cm and own weight only 39 kg. The cylinders of the boat are made of Viniplan 6379 fabric, it has a density of 1100 g / m2. The transom is installed not behind the bottom, but on the bottom. The seats are made of moisture-resistant film faced plywood. The deck is very hard. The maximum engine power for this boat is 15 hp. with. The set includes: paddles, a foot pump, seats, a repair kit, a key for the valve. Price $ 750.
Materials used in the manufacture of Russian-made inflatable boats
Just as in the rest of the world, at Russian enterprises that manufacture inflatable boats, the main production material is PVC - polyvinyl chloride and synthetic fabrics.
Fabrics determine the elasticity of the construction, for example, polyester fabric is stiffer than polyamide fabric. The elasticity of the polyamide fabric gives it the best tensile test performance.
By itself, polyvinyl chloride is a solid, but with the addition of polyurethane, the alloy becomes acceptable for the manufacture of strong and resilient inflatable boats.
For the manufacture of inflatable boats, a 5-7 layered sandwich made of fabric and a mixture of PVC and polyurethane is used. This material is well glued, cooked and vulcanized. By the way, the patch on the glue holds better than after vulcanization.
How to choose the right inflatable boat of Russian production
It is easy to choose a boat. Decide how many people will usually be on the boat. Calculate the required engine power based on the fact that one horsepower is needed for 20 kg of weight. and search the internet. Whichever boat you like, buy that one. But first, re-read all the forums, with the testimony of witnesses about the boat that you have chosen.
One tip. In the column for passenger capacity, divide everything by two. The boat, of course, can be loaded with the number of people specified in the specification, for example, when evacuating drowning people, but such a number will not work on fishing. Therefore, 260 cm long cannot be a boat for two fishermen.
Tuning of Russian-made inflatable boats
It implies making it heavier, so don't overdo it.
Nevertheless, the presence of a speedometer, GPS-navigator, barometer, bow electric motor with remote control, windscreen wipers, awning, audio system, holders for spinning rods (sacred), anchor rollers, searchlights, etc. will not hurt on board.
Look first at weight. Determine what is more important to you tuning or speed and consumption.
PVC inflatable boats are stronger than rubber ones, easy to store, varied in size and durable. They are suitable for trolling, hunting in swampy areas and general lake fishing.
When choosing, look at the power of the engine, the type of bottom, the brand, the carrying capacity, the number of guests on board. Use the filter on the left side of the screen and our online store will select the appropriate PVC boat models.
Benefits and differences
Inflatable rowing boats, motor boats, motor-rowing boats are practical and easy to use due to their low weight and material characteristics. For example, the lightweight and compact Flinc Malek 195 is suitable for fishing from the center of a small lake, overcoming light water obstacles alone. The larger Poseidon-520 is designed for 12 people and a motor up to 50 liters - it can be used for virtually any type of water recreation.
We have compiled general list advantages of such boats:
- Prices for PVC boats are among the lowest, but in terms of quality, these boats are not worse than others. Only rubber models are slightly lower or the same cost, but they are less durable and deteriorate faster.
- There are options for both a motor and oars, or for everything at once.
- PVC boats are lightweight. They can be transported rolled up even in the trunk or in a special backpack. For example, the weight of 195 fry is only 5.5 kg - it can be easily lifted by an adult. This will save on a trailer for transportation.
PVC boats are cheaper than wooden or iron boats, but at the same time they do not rot, do not rot, do not absorb moisture, are not afraid of frost or the sun (do not crack under ultraviolet light), do not deteriorate under the influence of microorganisms and persistently tolerate an aggressive environment (gasoline, oil). Therefore, they remain in perfect condition for a very long time.
PVC inflatable boats are lightweight, inexpensive, versatile and durable. We sell models from well-known, and most importantly, time-tested Russian and foreign brands. If you have any difficulties in choosing, call a consultant.
To buy a PVC boat in our online store, after choosing the product, fill in your personal data and indicate the delivery address, the period of which is 1-3 days. When buying for an amount of 15 thousand rubles or more, the purchase is delivered free of charge within Moscow within the Moscow Ring Road.
Payment is possible to the courier in cash only. At the store you can pay by credit card. Prepayment is relevant if the parcel is sent by a transport company to other regions.
* Calculations use average data for Russia
The organization of own boat production requires a relatively large start-up capital (according to some sources, from 3-5 million rubles) and, no less important, the presence of great knowledge and experience in this area. The manufacture of such products is a complex and time-consuming process. It can take several months to develop a single model, including design, sample fabrication and testing.
Inflatable boats are used by hunters, tourists and just vacationers. They are relatively reliable, compact, easy to operate, and inexpensive.
There are several of the most famous Russian manufacturers that specialize in the production of such products: Ufa plant, Yaroslavl plant, PFC Mnev and K LLC, Leader, TD Fregat LLC, TPS Center Mnev, Rotan, Mobile Group "," Solar "; joint ventures: Badger (St. Petersburg - South Korea), Korsar (Moscow / St. Petersburg - South Korea), Petroset (the official representative of Yamaha in Russia). Among Western manufacturing companies, whose products are actively promoted in Russian market, you can name Zodiak, QuickSilver, Suzuki Marine, Honda.
Earn up to
RUB 200,000 a month having fun!
Trend of 2020. Intelligent entertainment business. Minimum investment. No additional fees or charges. Turnkey training.
Inflatable boats are rowing and motor boats. The difference lies in their design. The first ones are quite simple and cheap. Their sides are usually divided into several compartments, which gives them greater safety: even if one compartment is damaged, the boat will not sink. The bottom (floor) of the boat is semi-rigid and rigid. In the first case, plastic or plywood is inserted into it, and in the second case, it is fully reinforced with plywood or a plate of light alloys. In addition, sometimes to give the hull more rigidity, it is equipped with a rigid bench, which is installed between the sides. In addition to or instead of it, inflatable cushions are also used as seating.
Models with an outboard engine differ from boats of the first type in design. The nature of the differences depends on the power of the installed engine and the operating conditions of a particular model. The main difference between these boats and rowing boats is in the presence of a rigid transom on which the engine is installed, and in more durable elements of its attachment to the hull.
Boats with a small engine up to 2-3 horsepower have either inflatable bottom, or reinforced with transverse slats. They, like ordinary inflatable boats, can easily be folded into a bag for transportation. Boats with a more powerful motor are equipped with rigid floorboards.
Inflatable boat production technology
In the production of inflatable boats, several basic materials are used: reinforced and unreinforced PVC materials, rubberized fabric, polyurethane, hipalon and neoprene. All these materials differ in properties and operating conditions. Most of the boats of domestic production and the cylinders for them are made of reinforced PVC. This material consists of several layers. It is based on a synthetic woven fabric, which is covered on both sides with several layers of PVC. Since polyvinyl chloride in its pure form is a non-plastic substance, polyurethane is added to it during production. There are such types of PVC fabrics as fabric, special for boats and construction. The special "boat" PVC material has several advantages. It is resistant to dirt, abrasion and UV radiation. It is easy enough to repair it if the boat suddenly leaks. The only negative: this material does not lend itself well to local staining. It can only be dyed completely and only at the production stage: special dyes are added to the polyvinyl chloride.
The second most popular material in our country, which is used for the production of boats, is rubberized fabric. Its main advantage is low price... Unfortunately, among the shortcomings, experts note a small resistance to burnout, abrasion, susceptibility to decay, etc.
Boats made of unreinforced polyvinyl chloride are mainly produced by Western companies. They are inexpensive, lightweight, and easy to use. The disadvantages include the ability of this material to stretch under the influence of high temperatures, poor elasticity at low temperatures and low strength. It is also worth noting that if the technology of gluing seams is used in the production of ordinary inflatable boats, then in the manufacture of models from unreinforced PVC the seams of the boat are glued, which increases its reliability.
Ready-made ideas for your business
Hipalon and neoprene are relatively new materials, but they are already actively used in the production of sports equipment, including wetsuits, boats, etc. They are also multi-layered and made on the basis of synthetic fabric. But unlike PVC, the first woven layer is covered first with a layer of neoprene, and on top of the layers of hipalon. This technology is expensive, so it is not used by domestic companies. In addition, the specificity of the raw materials used does not allow welding such material, which further increases the cost of the finished product. However, boats made of this material differ high quality and long service life.
Inflatable boats are also produced from polyurethane itself - the same one that is added to polyvinyl chloride to increase the plasticity of the latter. This material is characterized by high porosity, therefore it easily adheres to the fabric base. Boats made of this material are ideal for use in extreme conditions.
Russian boat manufacturers 60 domestic factories. Large brands and new brands of RIB motor boats, aluminum, PVC, fiberglass, yachts, boats, inflatable rubber, etc. Catalog 2020: official sites, addresses, contacts and prices of manufacturers-suppliers. Become a dealer, order a price list!
Manufacturers of inflatable and rigidly frame boats, when designing and manufacturing their products, strive to take into account the vast natural and climatic conditions, the possible conditions of water bodies, the operational requirements of numerous fishermen and hunters.
Software for the design of sketches and final drawings, automated cutting, production of component parts and assemblies on high-precision CNC machines allow the factories to produce small boats close to European quality standards.
For the manufacture of inflatable boats (and parts), domestic factories use:
- rubberized fabric. Low price of the product, but weak strength. The disadvantage of the material is mold if the storage rules are not followed, characterizes the lowest-budget version of the floating vehicle.
- reinforced five-layer PVC fabric. Thermoplastic polymer "PolyVinyl Chloride" is obtained from oil and sodium chloride. Polyester reinforcing cord gives strength and resistance to penetrating cuts and punctures. The outer polymer layer is waterproof, not destroyed by ultraviolet light, resistant to salt water, fuels and lubricants. Seams are easily and reliably welded with hot air or glued with polymer adhesives.
- hypoolon. Airtight polymer material. Does not require pumping for 6 - 10 weeks. Stronger and more durable than PVC. The impossibility of air welding of seams requires equipping with additional special equipment.
- polyurethane. Material for boats used in extreme conditions. Strong, plastic, reliably reinforced, easily glued due to sufficient porosity, resistant to abrasion.
In the manufacture of rigid hull boats, polymer fiberglass mixtures are used, different kinds plywood, rolled aluminum alloy AMg5M. Good plasticity of the alloy for pressing and cold stamping, strength, lightness, reliable weldability, corrosion resistance have ensured the widespread use of the alloy in shipbuilding with the title "marine".
It is possible to buy Russian-made boats in bulk directly from manufacturers, without intermediary trade margins. Regional dealers, do not miss the chance of fruitful cooperation!
Buy Russian boats at prices without intermediaries, become a dealer of a small boat factory in the region!