* Calculations are based on average data for Russia

The organization of our own boat production requires a relatively large start-up capital (according to some sources, from 3-5 million rubles) and, no less important, the presence of great knowledge and experience in this area. The manufacture of such products is a complex and time-consuming process. It can take several months to develop a single model, including design, sample fabrication and testing.

Inflatable boats are used by hunters, tourists and just vacationers. They are relatively reliable, compact, easy to operate, and inexpensive.

There are several of the most famous Russian manufacturers that specialize in the production of such products: Ufa plant, Yaroslavl plant, PFK Mnev and K LLC, Leader, TD Fregat LLC, TPS Center Mnev, Rotan, Mobile Group "," Solar "; joint ventures: Badger (St. Petersburg - South Korea), Korsar (Moscow / St. Petersburg - South Korea), "Petroset" (the official representative of Yamaha in Russia). Among Western manufacturing companies, whose products are actively promoted in Russian market, you can name Zodiak, QuickSilver, Suzuki Marine, Honda.

Earn up to
RUB 200,000 a month having fun!

Trend of 2020. Intelligent entertainment business. Minimum investment. No additional deductions and payments. Turnkey training.

Inflatable boats are rowing and motor boats. The difference lies in their design. The first ones are quite simple and cheap. Their sides are usually divided into several compartments, which gives them greater safety: even if one compartment is damaged, the boat will not sink. The bottom (floor) of the boat is semi-rigid and rigid. In the first case, plastic or plywood is inserted into it, and in the second case, it is fully reinforced with plywood or a plate of light alloys. In addition, sometimes to give the hull more rigidity, it is equipped with a rigid bench, which is installed between the sides. In addition to or instead of it, inflatable cushions are also used as seating.

Models with an outboard engine differ markedly from boats of the first type in design. The nature of the differences depends on the power of the installed engine and the operating conditions of a particular model. The main difference between these boats and rowing boats is the presence of a rigid transom on which the engine is installed, and in more durable elements of its attachment to the hull.

Boats with a small engine up to 2-3 Horse power have either an inflatable bottom or reinforced with transverse slats. They, like ordinary inflatable boats, can easily be folded into a bag for transportation. Boats with a more powerful engine are equipped with rigid floorboards.

Inflatable boat production technology

In the production of inflatable boats, several basic materials are used: reinforced and unreinforced PVC materials, rubberized fabric, polyurethane, hipalon and neoprene. All these materials differ in properties and operating conditions. Most of the boats of domestic production and the cylinders for them are made of reinforced PVC. This material consists of several layers. It is based on a synthetic woven fabric, which is covered on both sides with several layers of PVC. Since polyvinyl chloride in its pure form is a non-plastic substance, polyurethane is added to it during production. There are such types of PVC fabrics as fabric, special for boats and construction. The special "boat" PVC material has several advantages. It is resistant to dirt, abrasion and UV radiation. It is easy enough to repair it if the boat suddenly leaks. The only negative: this material does not lend itself well to local staining. It can only be dyed completely and only at the production stage: special dyes are added to polyvinyl chloride.

The second most popular material in our country, which is used for the production of boats, is rubberized fabric. Its main advantage is low price... Unfortunately, among the shortcomings, experts note a small resistance to burnout, abrasion, susceptibility to decay, etc.

Unreinforced PVC boats are mainly produced by Western companies. They are inexpensive, lightweight, and easy to use. The disadvantages include the ability of this material to stretch under the influence of high temperatures, poor elasticity at low temperatures and low strength. It is also worth noting that if the technology of gluing seams is used in the production of ordinary inflatable boats, then in the manufacture of models from unreinforced PVC the seams of the boat are glued, which increases its reliability.

Ready-made ideas for your business

Hipalon and neoprene are relatively new materials, but they are already actively used in the production of sports equipment, including wetsuits, boats, etc. They are also multi-layered and made on the basis of synthetic fabric. But unlike PVC, the first woven layer is covered first with a layer of neoprene, and on top of the layers of hipalon. This technology is expensive, so it is not used by domestic companies. In addition, the specificity of the raw materials used does not allow welding such material, which further increases the cost of the finished product. Nevertheless, boats made of such material are of high quality and long service life.

Inflatable boats are also produced from polyurethane itself - the same one that is added to polyvinyl chloride to increase the plasticity of the latter. This material is characterized by high porosity, therefore it easily adheres to the fabric base. Boats made of this material are ideal for use in extreme conditions.

Inflatable boats made of PVC are stronger than rubber ones, easy to store, varied in size and durable. They are suitable for trolling, hunting in swampy areas and general lake fishing.

When choosing, look at the engine power, bottom type, brand, carrying capacity, the number of guests on board. Use the filter on the left side of the screen and our online store will select the appropriate PVC boat models.

Benefits and differences

Inflatable rowing, motor, motor-rowing boats are practical and easy to use due to their low weight and material characteristics. For example, the lightweight and compact Flinc Malek 195 is suitable for fishing from the center of a small lake, overcoming light water obstacles alone. The larger Poseidon-520 is designed for 12 people and a motor up to 50 liters - it can be used for virtually any type of water recreation.

We have compiled general list advantages of such boats:

• Prices for PVC boats are among the lowest, but in terms of quality, these boats are not worse than others. Only rubber models are slightly lower or the same cost, but they are less durable and deteriorate faster.
• There are options for both a motor and oars, or for everything at once.
• PVC boats are lightweight. They can be transported rolled up even in the trunk or in a special backpack. For example, the weight of fry 195 is only 5.5 kg - it can be easily lifted by an adult. This will save on a trailer for transportation.

PVC boats are cheaper than wooden or iron boats, but at the same time they do not rot, do not rot, do not absorb moisture, are not afraid of frost or the sun (do not crack under ultraviolet light), do not deteriorate under the influence of microorganisms and persistently tolerate an aggressive environment (gasoline, oil). Therefore, they remain in perfect condition for a very long time.

PVC inflatable boats are lightweight, inexpensive, versatile and durable. We sell models from well-known, and most importantly, time-tested Russian and foreign brands. If you have any difficulties in choosing, call a consultant.

To buy boat pvc in our online store, after choosing the product, fill in your personal data and indicate the delivery address, the period of which is 1-3 days. When buying for an amount of 15 thousand rubles or more, the purchase is delivered free of charge within Moscow within the Moscow Ring Road.

Payment is possible to the courier in cash only. At the store you can pay by credit card. Prepayment is relevant if the parcel is sent by a transport company to other regions.

Russian fishermen have appreciated domestic inflatable boats, and they are in constant demand with them. Several domestic manufacturers compete with each other in the quality, reliability and comfort of the boats.

Yaroslavl and Ufa plants

The factories of ZAO Yaroslavl-Rezinotekhnika and OAO UZEMIK produce in total about 70 models of boats from PVC.

Of these, the most popular models are:

Ibis 20

A boat with a lifting capacity of 500 kg and dimensions of 3600x1650 mm. The bottom is made of slatted slats. Has two hard seats. The boat is equipped with collapsible duralumin oars and a pump. Three independent air compartments. Recommended motor power - 20 HP. There are eight boats in the model range for motors of 3, 5, 8, 6, 10, 15, 20, 25 hp. Price $ 640.

The boat with an inflatable keel is 310 cm long and has a carrying capacity of 375 kg. On the bottom there is a rigid slate made of laminated marine plywood. Designed for use with a motor with a maximum power of 10 liters. with. The line includes 4 models for 6, 8, 10, 20 hp motors. with. The boat hull is equipped with a fender. The boat is packed in two wardrobe trunks and is completed with two rigid seats, collapsible duralumin oars,. The price of the boat is $ 525.

ML-2

The smallest motor boat made of PVC produced by the Ufa plant of JSC "UZEMIK" with a length of 250 cm and a carrying capacity of 300 kg. The maximum permissible motor power is 8 HP. with. The assembled boat itself weighs 42 kg. The bottom is made of collapsible rigid slate. Three independent air compartments. Price $ 236.

Karaidel-44

A boat with an inflatable keel with a carrying capacity of 400 kg and a length of 360 cm. It has three independent balloons, except for the keel. The boat is designed for an engine with a capacity of up to 12 liters. with. The boat weighs 75 kg. Price $ 640.

Manufacturer Mnev and K

Legendary inflatable boat with welded seams inflatable keel weighing 46 kg and a length of 3 meters. The bottom is made of hard flooring. Designed for the use of engines with a maximum power of up to 8 liters. with. Loading capacity 370 kg. It is made of multilayer PVC with a density of 850 g / m². It has four independent compartments that form a spacious cockpit. It is completed with oars, floorboards, pump, two cans, stringers, wardrobe trunks. Additionally, it can be completed with an awning tent. The line includes 7 models with lengths from 2.75 m to 4.0 m. Price $ 565.

A model from a series of heavy boats, of which there are four varieties in the line, with a length from 4.2 m. To 5 m. With a carrying capacity from 820 kg. To 1 ton. Recommended, and it is also the maximum engine power, 35 liters. with. It has four independent balloons and an inflatable keel. The boat is designed for long and comfortable journeys and even transportation heavy loads and horse-drawn animals. Five independent air compartments. Hard flooring bottom. Boat weight 100 kg. The boat can be equipped with a console and a tent. Price $ 1165.

Manufacturer Leader

Small-sized boat made of five-layer PVC with a length of 2.5 m and a carrying capacity of 320 kg. The weight of the boat is only 22 kg, which even a teenager can bear. The boat is designed for use with an engine up to 6 HP. with. The bottom is made of slatted flooring. The set includes: collapsible aluminum oars, two plywood cans, a pump, a repair kit and a backpack for carrying. Price $ 367.

Heavy boat with a lifting capacity of 1100 kg. It has 4 independent compartments and an inflatable keel. Designed to work with a motor with a maximum power of 40 liters. with. Hard flooring bottom. Based on the declared characteristics, it can take on board any small car: Zaporozhets, Oka, Smart. In addition to the standard equipment, it is equipped with two overpressures. Price $ 980.

Manufacturer Solar

Solar 330

The most popular boat size is 330 cm and own weight only 39 kg. The cylinders of the boat are made of Viniplan 6379 fabric, it has a density of 1100 g / m2. The transom is installed not behind the bottom, but on the bottom. The seats are made of moisture-resistant film faced plywood. The deck is very hard. The maximum engine power for this boat is 15 HP. with. The set includes: paddles, a foot pump, seats, a repair kit, a key for the valve. Price $ 750.

Materials used in the manufacture of Russian-made inflatable boats

Just as in the rest of the world, at Russian enterprises that manufacture inflatable boats, the main production material is PVC - polyvinyl chloride and synthetic fabrics.

Fabrics determine the elasticity of the construction, for example polyester fabric is stiffer than polyamide fabric. The elasticity of the polyamide fabric gives it the best tensile test performance.

By itself, polyvinyl chloride is a solid, but with the addition of polyurethane, the alloy becomes acceptable for the manufacture of strong and resilient inflatable boats.

For the manufacture of inflatable boats, a 5-7 multilayer sandwich made of fabric and a mixture of PVC and polyurethane is used. This material is well glued, cooked and vulcanized. By the way, the patch on the glue holds better than after vulcanization.

How to choose the right inflatable boat of Russian production

It is easy to choose a boat. Decide how many people will usually be on the boat. Calculate the required engine power based on the fact that one horsepower is needed for 20 kg of weight. and search the internet. Whichever boat you like, buy that one. But first, re-read all the forums with the testimony of witnesses about the boat you have chosen.

One piece of advice. In the column for passenger capacity, divide everything by two. The boat, of course, can be loaded with the number of people specified in the specification, for example, when evacuating drowning people, but such a number will not work on fishing. Therefore, 260 cm long cannot be a boat for two fishermen.

Tuning of Russian-made inflatable boats

It implies making it heavier, so don't overdo it.

Nevertheless, the presence of a speedometer, GPS-navigator, barometer, bow electric motor with remote control, windshield wipers, awning, audio system, holders for spinning rods (sacred), anchor rollers, searchlights, etc. will not hurt on board.

Look at weight first. Determine what is more important to you tuning or speed and consumption.

Russian boat manufacturers 60 domestic factories. Large brands and new brands of RIB motor boats, aluminum, PVC, fiberglass, yachts, boats, inflatable rubber, etc. Catalog 2020: official sites, addresses, contacts and prices of manufacturers-suppliers. Become a dealer, order a price list!

Manufacturers of inflatable and rigidly frame boats, when designing and manufacturing their products, strive to take into account the vast natural and climatic conditions, the possible conditions of water bodies, the operational requirements of numerous fishermen and hunters.

Software for the design of sketches and final drawings, automated cutting, production of component parts and assemblies on high-precision CNC machines allow factories to produce small boats close to European quality standards.

For the manufacture of inflatable boats (and parts), domestic factories use:

• rubberized fabric. Low price of the product, but weak strength. The disadvantage of the material - mold if the storage rules are not followed, characterizes the lowest-budget version of the floating vehicle.
• reinforced five-layer PVC fabric. Thermoplastic polymer "PolyVinyl Chloride" is obtained from oil and sodium chloride. Lavsan (polyester) reinforcing cord gives strength and resistance to penetrating cuts and punctures. The outer polymer layer is waterproof, not destroyed by ultraviolet light, resistant to salt water, fuels and lubricants. Seams are easily and reliably welded with hot air or glued with polymer adhesives.
• hypoolon. Airtight polymer material. Does not require pumping for 6 - 10 weeks. Stronger and more durable than PVC. The impossibility of air welding of seams requires equipping with additional special equipment.
• polyurethane. Material for boats used in extreme conditions. Strong, plastic, reliably reinforced, easily glued due to sufficient porosity, resistant to abrasion.

In the manufacture of rigid hull boats, polymer fiberglass mixtures are used, different kinds plywood, rolled aluminum alloy AMg5M. Good plasticity of the alloy for pressing and cold stamping, strength, lightness, reliable weldability, corrosion resistance have ensured the widespread use of the alloy in shipbuilding with the title "marine".

It is possible to buy Russian-made boats in bulk directly from manufacturers, without intermediary trade margins. Regional dealers, do not miss the chance of fruitful cooperation!

Buy Russian boats at prices without intermediaries, become a dealer of a small boat factory in the region!

A boat provides ample opportunities for lovers of active recreation on the water. Fishermen use the floating craft to search for and obtain the coveted trophy, travel lovers float down the rivers, EMERCOM employees help people in trouble. Inflatable boats made of PVC are in great demand. They are distinguished by an affordable price, can be transported in a passenger car, and behave steadily on a wave. In addition, the polyvinyl chloride material has high strength, resistance to mineral oils, acids, alkalis and solvents. There are many different designs, boats differ in size, capacity, carrying capacity. Therefore, many questions arise when buying. Experts will help you find the answers.

1. For fishing and leisurely walks in small waters, compact rowing boats are suitable. They are equipped with oars, and the inflatable boards are of a closed circuit. These are the most budget-friendly small boats.
2. PVC inflatable boats under the motor instead of the rear wall have a rigid transom, to which the power unit is mounted. This type of small craft is very popular with trollers, rescuers and travelers. The capacity of motor boats can be up to 8 people.
3. Rowing boats are of a closed structure with a hinged transom on the rear tank. Such models are required by fishermen and hunters when they have to overcome both areas with clean water and water areas overgrown with grass.
4. As for such parameters as roominess or carrying capacity, the user must decide for himself whether he will rest alone or in a company with friends. It is important to strictly adhere to the restrictions indicated by the manufacturer in order to ensure maximum safety on the water.

Our review includes the best PVC boat manufacturers. When determining leading brands, the following criteria were taken into account:

• product innovation;
• specifications;
• price;
• expert opinion;
• consumer reviews.

TOP 10 best PVC boat manufacturers

10 Intex (Intex)

World leader in inflatable products
Country: USA (made in China)
Rating (2019): 4.4

In 1964 was founded American company Intex. The main activity was the manufacture of inflatable products. Today the company occupies a leading position in different countries, including in Russia. The company managed to achieve high sales after the transfer of production facilities to China (2002). The manufacturer has managed to achieve an excellent price-performance ratio. The entire model range has quality certificates. In addition to boats, the range includes inflatable furniture, swimming pools, arenas and much more.

Anglers are showing great interest in the Intex Seahawk-200 inflatable boat. This rowing model is sold at an affordable price, it is lightweight and good handling. The model holds up to 200 kg, and is brought into working position by a standard pump in 10-12 minutes. The disadvantages include the fear of a high wave, the fragility of plastic couplings.

9 Rotan

Best lifting capacity
Country Russia
Rating (2019): 4.5

In 2003, three designers organized a company for the production of Rotan inflatable boats. The products compare favorably with analogs made of PVC, as well as aluminum punt boats with a high carrying capacity. All Rotan boats have an inflatable bottom, which made it possible to reduce the time of folding and putting into working position. The abandonment of wooden elements had a beneficial effect on the weight of the boat. For example, the Rotan 380 model in full gear weighs 52 kg with a length of 3.8 m, a width of 1 m and a height of 0.7 m. But most of all travelers and fishermen value Rotan inflatable boats for their high stability, which is perfectly combined with seaworthiness.

Consumers in the reviews note the carrying capacity of the boat, the well-thought-out design of the vessel, and the stability on the water. The disadvantages include the high price and meager configuration.

8 Mnev and K

The richest production experience
Country Russia
Rating (2019): 4.5

Back in 1988, the company "Mnev and K" appeared. Over the 23 years of its existence, the company's employees have designed and brought to their logical conclusion more than 70 developments. In order to reach a wide range of potential buyers, the team launched rowing boats, motorized vessels, as well as structures with a rigid hull RIB (RIB) 2-8 m long. several patents. Among the consumers of "Mnev and K" products there are avid fishermen, hunters, travel enthusiasts, as well as representatives of the Ministry of Defense and the Ministry of Emergencies.

Many flattering words in the reviews said by the fishermen regarding the boats of the Murena series. The best characteristic of the model is good move against the current or wave. Also, users note the excellent quality of PVC, durability and capacity of the model. The disadvantages include heavy weight and weak straps around the backpack.

7 HUNTERBOAT

Triple quality control system
Country Russia
Rating (2019): 4.6

The young company HUNTERBOAT has been operating on the domestic market since 2009. high quality manufacture of PVC boats. Thanks to the triple verification system, it was possible to exclude the sale of defective products. An extensive dealer network throughout the country was quickly created. The presence of our own service centers allows us to carry out warranty and post-warranty service of boats. The manufacturer has Russian certificates confirming the high quality of the products. The assortment includes both rowing models and motorized boats. The most popular rowing boat manufactured by HUNTERBOAT is the Hunter 280 R. Among the motor models, the Hunter 335 remains the most popular.

To the advantages of St. Petersburg boats, users refer to an affordable price, decent quality, good carrying capacity. The weak point is the backpack.

6 Boat Master

The smartest marketing
Country Russia
Rating (2019): 4.7

The Master of Lodoks company appeared in Ufa in 1993. To meet the demand of the most different groups population, employees went to a competent marketing move. They have developed and implemented 5 different brands. The most famous and popular of them is the Aqua range. In terms of price, Riviera can compete with this brand; for some, Taimen, RUSH and Apache will become interesting models. Thanks to our own developments, which are issued with 4 patents, we managed to find interesting design solutions (a boat with a hydro-ski, a bottom in the form of a gull wing). Active participation in sporting events made it possible to find weak points and timely correct mistakes. As a result, 9 medal places in various competitions in powerboat sports.

The Aqua 260 model deserves the most flattering words. Its carrying capacity is 220 kg. In the reviews, anglers characterize it as the best budget rowing boat.

5 Flinc

Lightweight and lightweight
Country Russia
Rating (2019): 4.7

Flinc specializes in the design, manufacture and sale of PVC inflatable boats. Products of a domestic manufacturer are easy and comfortable to move. The development of many models was carried out with the participation of experienced hunters and fishermen. The company constantly participates in various exhibitions, where you can directly ask for the opinion of consumers. Reviews about the boats can be left or read on the official website flinc.ru. Among the buyers of inflatable boats are not only hunters and fishermen, but also fans of tourist travel by water. The assortment includes both rowing boats and small boats with a motor of 2-3.6 m in length. A wide range of models is complemented by affordable prices.

One of the most successful developments was the Flinc 320 motor boat. Users in the reviews note the low weight, compact dimensions, the ability to quickly get on the glider together with a 3.5 liter engine. with.

4 Solar

The largest Russian manufacturer
Country Russia
Rating (2019): 4.8

An unusual design of PVC inflatable boats was proposed by the designers of the Russian company Solar. The company is the largest manufacturer of small boats on the domestic market. Experts note the perfect combination of innovative approaches and high consumer characteristics of Solar products. Unlike competitors, the manufacturer equips even the smallest models with bottom, floor and cylinder amplifiers. The wall thickness reaches 2.6 mm, and the reinforced layer provides additional structural strength. Therefore, it is quite problematic to damage the boat under normal conditions. Since the establishment of the company (2002), boats have been equipped with inflatable bottom V-shape. Rigidity is achieved not by air pressure, but by vertical and longitudinal baffles.

Users in the reviews note such advantages of the Solar 350 boats, such as ease of assembly and disassembly, low weight, and permeability of the inflatable bottom.

3 Flagship

The best small boats of the catamaran type
Country Russia
Rating (2019): 4.8

The domestic company Flagman has been developing and manufacturing PVC inflatable boats since 2005. During this time, several different lines have been manufactured. Boats with an inflatable bottom NDND, which are designed for a motor, are especially reliable. But fans of active recreation show the greatest interest in Flagman catamarans. The manufacturer began to make vessels with such an unusual design in 2014. Thanks to our own developments, it was possible to solve a number of difficult tasks... Specialists note innovative technology elastomer coating. Seamless, durable protection can be applied to any elastic surface. This treatment made it possible to prevent punctures when colliding at speed with sharp branches or snags.

Judging by the reviews of domestic fishermen, inflatable boats Flagman 320 are considered one of the best in terms of safety. They are lightweight, behave well in windy weather, and have a reasonable price.

2 Frigate

The most advanced domestic manufacturer
Country Russia
Rating (2019): 4.9

The first inflatable boats under the Frigate brand saw the world in 1991. During this time, many designs and technological solutions were developed and implemented. For example, in 2000, Frigate created boats for a motor with variable section cylinders. And in 2005, the Russian Emergencies Ministry began to equip amphibious aircraft with Frigate inflatable boats. The company boasts many different awards. In 2009, the first welded PVC boat was recognized the best product years of Russia. The last achievement of the Frigate was the crossing of Eurasia in 2016.The boats started in the Pacific Ocean and arrived in the Arctic Ocean, covering a distance of 2800 km. Distinctive feature Fregat boats are equipped with independent compartments (2-10 pieces), which ensures maximum reliability and unsinkability.

Good feedback from users goes to the Frigate M-2 rowing boats and the Frigate 280 models under the motor. The build quality, wave stability and reliability are especially noted.

1 Yukonaboats

World renowned manufacturer
Country: Canada
Rating (2019): 4.9

PVC boats of the Canadian company Yukonaboats are well known all over the world. For 15 years of active marketing policy, the manufacturer managed to cover the market North America, Southeast Asia and Europe. Since 2008, Yukonaboats has been operating in the domestic market. The lineup is represented by boats for a wide variety of purposes, from single-seat models for small rivers and lakes to serious marine vessels. A variety of equipment is offered to users. There are boats with a lightweight rack-and-pinion floor, there are models with an inflatable Air Deck in the range, in some models the platform is made of moisture-resistant plywood or aluminum. All products have been tested and obtained ISO 6185 STANDART certification.

In our country, inflatable boats for fishing Yukona 280GT and Yukona 380 NDND with a capacity of 2-3 people are in special demand. In the reviews, users note the light weight, compactness, and the presence of a convenient cover.