A simple way to catch fish with a plastic bottle. A simple way to catch fish with a plastic bottle Muzzle for catching fish from a plastic bottle

Fishing method plastic bottle does not require much effort and time from you to make a simple fishing tackle.
Such a trap can be used to fish in almost all regions and in all continents where there is a river with fish.
All you need is a plastic bottle, hot glue gun, soldering iron, knife, fishing line or rope.
We take a five liter plastic bottle.

Cut off the top.

Turn the top over and insert it into the same base with the other side.

We fix it with hot glue. You can take a stationery stapler and staple the pieces with it, but I was afraid the staples might scare the fish away.

Further, from all sides with a heated soldering iron, we make holes 1-0.5 cm in diameter. 6-8 pieces on each side.

We need one more bottle, from which it is necessary to cut off the neck with a lid.

We lean this neck against the bottom of our trap, circle it with a marker.

Cut out a hole.

We insert the neck with the lid.

We fix it with hot glue.

Through this neck with a lid, we will take the catch and throw in complementary foods.

We tie the fishing line, well, if not, the rope. Better, of course, the fishing line, since it is not visible.

That's all. Let's start testing. First of all, we throw the bait inside. It can be crushed bread, or some other tasty bait for fish.

Carefully throw in the trap. We are waiting for her to dive under the water. And we are waiting for about 15 minutes, it all depends on your area.

We take out the trap and wait until all the water is drained through the side holes. Then we unscrew the side cover and pour out the catch with the rest of the water.

Of course, you cannot catch a large fish with such a trap, but nevertheless it can be useful to you for various needs. Although, if you take a bigger bottle like from a cooler for 50 liters, it can become a trap for big fish.

Fish trap from a small bottle for fry

Another trap. We take two bottles (I took them with a volume of 0.6 liters). And we repeat with them everything the same as in the first case with a large bottle. With the exception of the side hole for the lid, we will not cut off the top, but the bottom of the first bottle.

A plastic bottle can be found in every home. For some it is nothing more than rubbish, but for others it is a useful item. Everyone can find a special use for it. For children, various fakes are made from them: bird feeders, and flower stands. A lot of useful little things can be made from a plastic bottle, it only takes a little time, patience and creativity.

Even anglers have found a use for it. Some designs that have passed the test in practice are willingly shared in this article.

Plastic bottle fishing

Fishing requires a huge amount of special devices which, by the way, are quite expensive. Therefore, a 1.5 - 2 liter bottle will help you significantly save money.

Bottle - anchor

If you plan to go fishing on a boat, then you will definitely need an anchor, and sometimes two, to fix the boat motionlessly. In such cases, one anchor is installed on the bow of the boat and, accordingly, the second is installed on the opposite one. If there is a problem with the anchors, then a plastic bottle will come to the rescue. In a few minutes, you can make a fake from it, which will perform the function of an anchor.

To do this: make two holes in the lid, thread a dense rope or thick wire, make a loop, and fasten it with a knot from the outside. We fill the bottle with sand, small pebbles, you can add water. We fasten the cap to the bottle. We tie a rope of the required length to the loop. ready.

Tackle is a trap

The next invention is the fish trap. Fishermen have been using such gear for a long time. You can lure small fish into such a device, which will be useful when fishing "on live bait" of larger individuals. It is simple to make it: cut off the neck by about 1 of the entire length of the bottle, get a funnel, turn it over and install it in the body so that the neck coincides with the middle of the bottom of the bottle. We connect the resulting parts tightly. To do this, you can use a soldering iron or if you are already in nature, carefully walk along the edge with a hot coal.

Small holes need to be punctured along the entire length of the bottle for the water drain. We make 2 holes along the edges to fix the handle; it can be made from any rope at hand. We pass it through the holes and fasten with knots. Put some sand for the load and the bait inside. Having noticed the delicacy, the fry will penetrate inside through the neck.

Plastic bottle feeder for fishing

Not an intricate exhibit for fishing, but it is very necessary - a feeder. There are several ways to make it from a plastic bottle.

First: "Cover - a feeder". You will need a cover, a lead washer for the sinker, a carabiner, a few hooks and a line. We make a hole in the center of the lid and thread the fishing line, tightening the loop on both sides, put a sinker on the outer one, and hooks on the inner one. We fix the weight on the bottom of the lid. This device will serve as a weighting agent and a feeder at the same time. On the interior we lay out the bait, under which the hooks are hidden. We throw it and wait for a bite. Such a feeder will be useful when fishing for bream, carp, roach. Corn, dough, pasta or maggots are great for bait.

The second manufacturing method is as follows: cut off the bottom and neck from the bottle. Cut the resulting cylinder across, mark the location of the feeders with a marker. Cut out the holes according to the marks. We fold the cylinder, fix the edges, for this you can use a soldering iron. According to the dimensions of the resulting structure, we bend the lead plate at the place of the bend and tighten the fastening knot. The feeder is ready.

Homemade fish trap, in the article briefly about how to make a fishing "muzzle" from the grass. You will definitely catch it in your ear.

There is a category of people who are ready to live in a natural environment with a minimum of means for survival. There is some kind of extreme in this. And until you try this lifestyle yourself (or games, as it is more convenient for you), until then you will not understand all the charm of such a way of existence. For example, our team has the most different people: from very young (18-19 years old) to adults under 60 years old who occupy almost all social niches in urban life (students, managers, directors, etc.). But we were united by the fact that several times a year we get together, plan a common route for several days, and hit the road. The basic rule that everyone in our group observes is that we get food ourselves. We take practically nothing with us, only the most necessary things, since situations are different. So, the ability to get food in the forest or on a pond is the key to survival in a difficult situation. Many people who in ordinary life did not believe in themselves, after such trips acquire some confidence in their abilities, which as a result affects their future life.

There are many ways to get food in nature. I will try to tell you a simple method of extraction (capture), provided that you only have a great desire to stay with food, the desire to live, and the trees growing nearby (ideally, spruce, pine, etc.). If there are trees nearby, you can build several devices with which you can actually catch fish. I'll tell you only about one thing - about the muzzle. The muzzle is a fishing trap, which is generally a cylindrical lattice structure with the neck pointing inward. The neck gradually narrows towards the base, not reaching the last by 20-30 centimeters. The fish swims into the neck, gradually moves towards the bottom of the structure, passes through a narrow part, and is no longer able to get out. A person can only pull the muzzle out of the water and collect the catch. Under normal conditions, the bottom of the muzzle opens to make it easier to reach the fish, but we will make the muzzle a more primitive type.

Making a homemade fish trap

So, the first step is to cut down a few young branches that bend well and twist them into a circle. The ends can be tied with thinner branches and pinched into a split. Then, from thinner branches, freeing them from needles or leaves, you need to connect the finished circles to each other so that the distance between them is about 30-40 cm.To impart density to the structure, you can use several thick branches, which are fixed with thin branches along the round branches ... The result should be a kind of mesh cylinder, the bottom of which is also covered with thin branches.

Now we will make the neck. To do this, you need to stick several dense sticks into the ground so that at the ground they form a kind of circle with a diameter of about 10 cm, and their top forms a circle comparable to the diameter of our cylinder. After that, you need to tie the sticks with thin branches to get a mesh structure. Special care is not required here, the main thing is that the structure has some strength. When the neck is ready, it is tied with thin branches to the upper part of the cylinder, not forgetting to fix the lower part of the neck by the middle circles of the cylinder. Everything, homemade trap for fish for fishing is ready. Ideally, the muzzle is tied with a rope and thrown into the water. But, you can do without a rope, just in this case, you will have to climb into the water behind the muzzle to get it. Sometimes, to get the structure out of the water, we use a pole, it all depends on the situation. Practice shows that such a homemade fish trap is quite catching, it is enough for it to stay in the water for about 3-10 hours. For those who are fond of the topic of survival, this skill will be interesting and useful, the schemes for making a trap are just below.

All the best to you.

An excellent and non-standard version of the top, muzzle, hem (as soon as they do not call it) - a do-it-yourself fish trap.

It seems to be the simplest, but with some changes from those made from plastic bottles.

You will always fish for live bait with such a fishing homemade device.

Self-production of a trap-muzzle from PVC bottles for fishing (live bait)

You will need a couple of 5 liter plastic bottles. In these, they also sell water in the store.

At the first bottle, cut off 1/4 of the distance from the neck. It turns out 2 parts. At the short part, we cut off the neck completely (so the live bait will pass larger).

We cut off the bottom of the second bottle, leave the neck with the lid - we get a through plastic tunnel with a lid.

Now let's connect the long part of the first one to the tunnel. We make in a circle where the bottles are connected by a soldering iron. And then we tie-stitch with a fishing line.

Turn over short part the first bottle down with a bottleneck and insert it into our resulting design.

With a soldering iron we make holes in the junction of the funnel and the tunnel next to each other and tighten with a fishing line.

We repeat (making holes and pulling the fishing line together) from all four sides.

We make many holes throughout the shape so that the water can pass through and we tie a good handle to the beginning of the funnel.

Here is a homemade fish trap with your own hands from improvised means.

See the video below to make it clearer.